Enabling USB debugging

Sonim XP8 on Android 10.0.0

Link successfully copied to clipboard
Copy link

Turn on USB Debugging to help trouble shoot your device. Once USB Debugging is turned on, you will be able to plug your device into a computer to access your device's logs.

  1. Step 1/15

    From the Home screen, drag down the Notification panel.

    The indicator is towards the top.
  2. Step 2/15

    Drag down the Quick settings panel.

    The indicator is towards the top.
  3. Step 3/15

    Tap the Settings icon.

    The indicator is in the bottom right.
  4. Step 4/15

    Scroll to About phone.

    The indicator is towards the bottom.
  5. Step 5/15

    Tap About phone.

    The indicator is towards the bottom.
  6. Step 6/15

    Scroll to Build number.

    The indicator is towards the bottom.
  7. Step 7/15

    Tap Build number seven times.

    Note: You may be prompted to enter your device PIN or password. When Developer options has been enabled successfully, you will see a message at the bottom of the screen which states You are now a developer!

    The indicator is towards the bottom.
  8. Step 8/15

    Press the Back button.

    The indicator is in the bottom left.
  9. Step 9/15

    Tap System.

    The indicator is towards the bottom.
  10. Step 10/15

    Tap Advanced.

    The indicator is in the center.
  11. Step 11/15

    Tap Developer options.

    The indicator is towards the bottom.
  12. Step 12/15

    Scroll to USB debugging.

    The indicator is towards the bottom.
  13. Step 13/15

    Tap or slide the USB debugging switch to ON.

    The indicator is towards the right.
  14. Step 14/15

    Tap OK.

    The indicator is towards the right.
  15. Step 15/15
    Step 15 of 15:

    You've completed the steps!

    There are no indicators associated with this step.

Was this tutorial helpful?