Enabling USB debugging

LG V30 on Android 9.0.0

Link successfully copied to clipboard
Copy link

Turn on USB Debugging to help trouble shoot your device. Once USB Debugging is turned on, you will be able to plug your device into a computer to access your device's logs.

  1. Step 1/13

    From the Home screen, tap Settings.

    The indicator is towards the right.
  2. Step 2/13

    Scroll to System.

    The indicator is towards the bottom.
  3. Step 3/13

    Tap System.

    The indicator is towards the bottom.
  4. Step 4/13

    Tap About phone.

    The indicator is in the center.
  5. Step 5/13

    Tap Software info.

    The indicator is in the center.
  6. Step 6/13

    Tap Build number seven times.

    Note: You may be prompted to enter your device PIN or password. When Developer options has been enabled successfully, you will see a message at the bottom of the screen which states Developer mode has been enabled.

    The indicator is in the center.
  7. Step 7/13

    Tap the Back icon.

    The indicator is in the bottom left.
  8. Step 8/13

    Tap the Back icon again.

    The indicator is in the bottom left.
  9. Step 9/13

    Tap Developer options.

    The indicator is in the center.
  10. Step 10/13

    Scroll to USB debugging.

    The indicator is towards the bottom.
  11. Step 11/13

    Tap or slide the USB debugging switch to ON.

    The indicator is towards the right.
  12. Step 12/13

    Tap OK.

    The indicator is towards the right.
  13. Step 13/13
    Step 13 of 13:

    You've completed the steps!

    There are no indicators associated with this step.

Was this tutorial helpful?