Enhanced 911 (E911) is a service that allows emergency operators to provide better assistance to people calling 911 from their mobile phones. It provides emergency operators with more specific information about your location and displays your mobile phone number to emergency operators.
When you call 911 from your mobile phone:
- Provide your complete mobile phone number, including the area code, so that information can be passed on to emergency operators
- Give your location and the location of the emergency
- Stay on the line with the operator (911 calls are not billed)
- If disconnected, leave your phone on for call-backs
- If you’re underground or too far from a network antenna, your signal quality may be affected and you may not be able to connect to the network
To avoid making accidental emergency calls, don't program 911 into your phone.
E911 service locations
TELUS E911 service is currently accessible in most of Alberta, British Columbia, Ontario, Quebec, New Brunswick, PEI, Saskatchewan, the Greater Winnipeg area of Manitoba and the Greater Halifax area of Nova Scotia.
E911 is not yet available in Newfoundland due to limitations with landline network capabilities. However, Basic 911 service is available.
If E911 is not yet available in your area, you will be able to access it when you roam into E911 coverage areas.
E911 Phase 1
Displays your mobile phone number to emergency operators as well as the location of the cellular site carrying your call.
All phones and smartphones support E911 Phase 1.
E911 Phase 2
Provides improved location information to emergency operators. While Phase 1 is able to give the tower location, Phase 2 can also provide the longitude and latitude of the caller.
E911 calls from mobile phones are subject to the same limitations as regular calls from mobile phones. For example, if you’re underground or too far from a network antenna, your signal quality may be affected and you may not be able to connect to the network.
All phones and smartphones introduced as of February 1, 2010 support E911 Phase 2.
Starting April 6, 2019, all GPS-enabled devices globally will go through a clock rollover event. These devices include phones and smartphones. A small percentage of these phones will be negatively impacted by this rollover event.
TELUS customers using select phones and smartphones, may have impacts to their location accuracy, if that location is provided via GPS. E911 is an example of a service that uses the location details, and this location detail comes from various sources, of which GPS is one. In the event that GPS does not work, the phone can fall back to other sources of location, namely cell tower location, which will yield a location, but with slightly lower accuracy.
TELUS has worked with manufacturers to roll out fixes to affected devices. If your device is listed below, please update it to the latest software.
- Alcatel A50 (5085O)
- Alcatel 1 (5033O)
- Alcatel Lume (A466T)
- Alcatel Pixi 3(4) (A460T)
- Alcatel Pixi 3(4.5) (5017O)
Some devices, however, will not receive software patches due to their age. If your device is listed below, it is recommended that you are aware of this issue and exercise caution if you find yourself in a 911 situation. Alternatively, you can visit your nearest TELUS store to purchase a new device.
- Alcatel A392A / A392CC
- Alcatel Idol X+ (6043A)
- RIM BlackBerry Curve (9320)
- RIM BlackBerry Curve 3G (9300)
- RIM BlackBerry Torch (9800)
- RIM BlackBerry Bold (9700)
- RIM BlackBerry Curve (9360)
- RIM BlackBerry Bold (9780)
- RIM BlackBerry Bold (9790)
- HUAWEI Ascend Y330
- HTC Desire 320a (0PF1100)
- Motorola Charm (MB502)
- Motorola Defy (MB525)
- Motorola Key (EX225)
- Motorola Milestone (A853)
- Nokia 3710
- Nokia E71
- Nokia E72
- Sonim XP5560
- Sonim XP5560IS
E911 and VoIP Apps for Android Devices
There is a potential issue affecting 911 calling from certain Android devices with downloaded VoIP applications such as Viber or Skype. You may be unable complete calls to 911 if you have downloaded one of these apps and have made it the default call dialer on your device.
When you attempt to dial 911, the app dialer cannot process the call, because for 911 calls the VoIP application will revert back to the phone dialer to connect the call. However, if you have adjusted your settings to "Always use the app dialer", the phone dialer will send the call back to the VoIP app. A loop results, and the 911 call cannot be connected.
The settings within the application must be changed and ‘Just Once’ should be the default dialer setting.
Please do not dial 9-1-1 to test your device.
How to change your dialer settings
From your Android device:
- Tap Settings
- Tap Application Manager
- Tap on the Menu button on the device
- Tap Reset app preferences
- Tap Reset apps
Note: When using a VoIP app such as Skype or Viber, always press “Just Once” when prompted for use as the default dialer. This will ensure you are able to successfully place a 9-1-1 call if required.
We are committed protecting our customers and notifying them of any issues that impact emergency 911 calling from their TELUS devices. Google has indicated that this is a global problem and they are working with these app developers to fix this issue.
There is a fee collected in select provinces for the benefit of local 911 emergency operations centres. The amount of the fee is regulated in each province and the funds collected are used to facilitate local 911 services. Customers in Alberta, New Brunswick, Newfoundland and Labrador, Nova Scotia, Northwest Territories, Prince Edward Island, Québec and Saskatchewan will be affected. Refer to the table below for specific fee amounts, varying by province:
|Province||Monthly Fee for E911 Services|
|Newfoundland and Labrador||$0.75|
|Prince Edward Island||$0.70|