Inserting and Removing the nano SIM Card

ZTE MF279T Smart Hub on Other mf279tv0.2.0

Link successfully copied to clipboard
Copy link

Learn how to insert and remove a SIM card from your device. Your cellular service is activated through your SIM card; without it you cannot use cellular features. Note that a SIM card tray removal tool may be needed.

  1. Note: Don't touch the gold contacts on your SIM card. That could damage the card. If you’re using a new SIM card, you can activate it by calling your carrier.

    There are no indicators associated with this step.
  2. Step 1/6

    With your device turned off, remove the back cover by sliding from back to front.

    Note: You must have a nano SIM card inserted in your device to place calls and broadcast a wirelss connection over your carrier's network.

    The indicator is towards the top.
  3. Step 2/6

    Remove the battery using the finger notch.

    The indicator is towards the bottom.
  4. Step 3/6

    Slide the nano SIM card in or out of the slot with the gold contacts facing the device.

    Note: A micro SIM card may already be inserted in your phone.

    The indicator is in the center.
  5. Step 4/6

    Replace the battery, matching the contacts on the battery with the contacts in the battery slot.

    The indicator is in the center.
  6. Step 5/6

    Replace the bottom cover, lining up the notches and sliding from front to back.

    The indicator is in the center.
  7. Step 6/6
    Step 6 of 6:

    You've completed the steps!

    There are no indicators associated with this step.

Was this tutorial helpful?