Inserting and removing the micro SIM card from your OBD-II device

Drive+ app on iOS, Version 3.8.12

Link successfully copied to clipboard
Copy link

Learn how to insert and remove a SIM card from your device. Your cellular service is activated through your SIM card; without it you cannot use cellular features. Note that a SIM card tray removal tool may be needed.

  1. Note: Don't touch the gold contacts on your SIM card. That could damage the card. Your SIM card should activate once your device is powered.

    There are no indicators associated with this step.
  2. Step 1/6

    Locate the micro SIM card tray on the left side of your device.

    Note: You must have a micro SIM card inserted in your OBD-II device to connect to the Drive+ app and access your Wi-Fi hotspot.

    The indicator is towards the left.
  3. Step 2/6

    Press the card insertion/removal tool into the micro SIM card tray pinhole and push in until the tray releases.

    The indicator is towards the left.
  4. Step 3/6

    Slide the micro SIM card tray out of its slot.

    The indicator is towards the left.
  5. Step 4/6

    Insert or remove the micro SIM card into or from the tray with the gold contacts facing the back of the device.

    The indicator is towards the left.
  6. Step 5/6

    Press the micro SIM card tray back into its slot until it clicks, making sure it's secure.

    The indicator is towards the left.
  7. Step 6/6
    Step 6 of 6:

    You've completed the steps!

    There are no indicators associated with this step.

Was this tutorial helpful?