How to use Bluetooth Disarm
Manage your security system with Bluetooth
Bluetooth Disarm
With the new security system, you are now able to pair up to 5 devices to your panel for auto-disarm capability. You can also pair a phone to a specific partition if you have partitions setup at your home.
Enabling this capability will allow you to auto-disarm your system when you get within 15 feet of your security panel. If you have a smart lock, you may be able to set up a rule to auto-unlock your door as well!
To pair your phone to your Control Panel using Bluetooth:
- Before you begin, make sure Bluetooth is turned On and enabled on your phone
- Swipe down from the top by pressing the at the top of your screen to access the settings page
- Select Settings
- Select Advanced Settings
- Type in your master code
- Select Bluetooth Devices
- Select Add Device
- Select your device from the Control Panel
- Select Pair
- Input the code into your phone when prompted
- If you have Partitions set up, you can select the specific Partition the phone should be paired with. For more information on Partitions, click here
- Make sure your Bluetooth is left On to disarm your system in the future
Warning: Pairing a mobile device that is not on the list below may cause your security system to auto-disarm if your phone is left within the vicinity of the security. Make sure you only pair one of the below compatible mobile devices.
Compatible mobile devices
- iPhone 5
- iPhone 5s
- iPhone 6
- iPhone 6s
- iPhone 7
- iPhone 8
- iPhone X
- Samsung Galaxy Note 3
- Samsung Galaxy Note 5
- Samsung Galaxy S4
- Samsung Galaxy S5
- Samsung Galaxy S6
- Samsung Galaxy S7
- Samsung Galaxy S8
- LG Nexus 5
- LG Nexus 5x
- LG G3
- Huawei Nexus 6p
- HTC 10
- Google Pixel XL
- Google Pixel 2 XL
- OnePlus One
- OnePlus One 3
- OnePlus One 3T