Restart an Actiontec T1200H or T2200H modem

To restart your restart your Actiontec T1200H/T2200H modem:

1. From the back of your modem, disconnect the power cord
2. Wait 30 seconds
3. Reconnect the power cord to the back of your modem
4. Wait 5 minutes, then check your modem. The following lights should be green:
   • Power (solid green)
   • LAN Ethernet 1, 2, 3 or 4 (solid or blinking green)
     Note: If you're using a Wi-Fi connection, check the Wireless light instead.
   • DSL (solid green)
   • Internet (solid or blinking green)
     IMPORTANT: If any of these lights are off, check all cable connections to your computer, telephone jack, and modem. Your telephone cable should have a maximum length of 12 feet.
5. Try restarting your computer/device and reconnecting to the Wi-Fi
6. Launch your Web browser and test your internet connection

Note: Restarting or resetting your modem may only provide a temporary fix to your problem, if you find the issue reoccurs contact us in order for us to find and fix the root cause of your problem.