Reset an Actiontec T1200H or T2200H modem
How to reset an Actiontec modem to original factory settings
Factory resetting your modem will put all the settings back to default configuration. You should only do this if you are instructed to do so by one of our agents or one of our support articles.
To reset your
modem to its original factory settings:
Locate the red reset button on the back of the device
Using a thin object (e.g. a pushpin, paper clip or toothpick), press and hold the reset button for 30 seconds until the Internet light turns red
Your modem will restart automatically. Please allow up to 10 minutes for the process to complete
To reconnect to your modem, you will need to use the default Wi-Fi name and password listed on the sticker on the side of your modem
Factory resetting your modem will erase and reset any customized Wi-Fi name and password you may have. If you require assistance setting up a customized network name and password, visit
Change your Wi-Fi network's name and password
: Restarting or resetting your modem may only provide a temporary fix to your problem. If you find the issue reoccurs,
in order for us to find and fix the root cause of your problem.