Program your Slimline remote for Optik TV

How to program the TV and Aux button

Not your remote?

Program the TV button

If you need to reprogram your remote, locate the remote code for your TV
. Once you have a code, proceed to step 1.

Step: 1 of 4Select the type of device you want to control
Step 1 of 4: Select the type of device you want to control

Press the
mode
button until the red
TV light
on your remote flashes
Press and hold the
Options
button for 3 seconds, until the
TV light
flashes twice
Enter the code from the
Remote code tool
for your television. The light will flash twice
Press and hold the
Power
button. When your TV switches off, remove your finger from the button
Press
OK
. The red
TV light
will flash twice
Press the
Power
button again to switch your TV back on
Press the
mode
button until the green
OPTIK
light is illuminated at the top of your remote
Press the
TV power
button again to switch your TV back on
If you do not find a code that works for you try the following code:
Press and hold mode until the TV or Aux light flashes twice
- Enter the code
  29
  for TV and your remote will search for a code that may work
  Note
  : This may take up to 15 minutes. The TV or aux light will flash. Press okay and then the TV should be synced
- For DVD and blue ray enter 44
- For Amplifiers enter 79

Use the Remote code guide
 to find the code for your device. Once you have a code, proceed to step 1.

Press the
Mode
button until the yellow
AUX

light
on your remote flashes
Press and hold the
Options
button for 3 seconds, until the
AUX light
flashes twice
Check the user guide that came with your remote (or download a
PDF of the codes
) and find the code for your specific device
Enter the code for your device brand. The
AUX

light
will flash twice
Press and hold the
Power
button. When your device turns off, release the button
Press
OK
. The yellow
AUX light
will flash twice
Press the
Power
button again to turn on your device
Press the
Mode
button until the green
OPTIK light
at the top of your remote is lit