Set up a Siemens Gigaset SE567 modem for home Wi-Fi use
How to create a secure home Wi-Fi network with a Siemens modem
To set up a secure Wi-Fi network and wirelessly connect to the Internet, complete these steps while using a wired Internet connection. Log in to your Siemens Gigaset wireless gateway and Launch your Web browser.
From the upper left corner of your browser, select
File.
Note:
If your browser taskbar is not displayed, press
Alt
on your keyboard
Click
Open
Type 192.168.1.254 press
Enter
. The Home screen is displayed
From the top right corner, click
Login
Type the following information:
Please choose your role: admin
Please enter your password: telus
Note
: telus is the default password if you have personalized your settings you will need to enter the password you created
Select
OK.
You're now logged in to your wireless gateway.
Select
Advanced Settings
From the left pane, select
Wireless Network
. The Wireless Setup Configuration screen is displayed.
Enter these settings as follows:
Wireless Interface: Enable
SSID: Clear the text-box then type any name that will allow you to identify your network
Channel: 1 or 11 are recommended
Clear the
Enable Auto Scan on Power ON
check box
Enable SSID Broadcast: Enable
Power: Highest
When you're finished, select
Apply
From the left pane, select
Encryption & Authentication
From the
Security Mode
menu, select WPA-PSK AES for enhanced security
Select
Apply
From the left pane, select
WPA
Clear the
Key
text-box then type your desired Wi-Fi network password.
Note:
Your password must be between 8-63 characters and consist of letters, numbers or a combination of both