HD wireless digital box installation

Follow the instructions to install your HD wireless digital box

HD wireless digital box installation (PDF)

In order to configure your digital box, you must have a working Internet network. 

To install your HD wireless digital box, please start with step  2

To change an existing digital box, please complete the step below first.

Disconnect all cables connected to the existing digital box
Install your HD wireless digital box by following these steps:
Connect the power of your HD wireless digital box with the cable provided
Using the HDMI cable included in the box, connect the wireless digital box to an unused HDMI socket on your TV
Using the remote control supplied with your TV, turn on the TV and use the input / source button to select the desired input
When the screen illustrated below appears, press the
OK
button on your OPTIK remote control
When the screen illustrated below appears, press and hold the WPS button on your modem for 10 seconds. The Wi-Fi indicator will flash to indicate that synchronization is in progress. This may take a few minutes
A message will appear on the screen confirming that the synchronization has been successfully completed. Connection bars appear on your wireless digital box
Learn how to
pair the remote control with your TV
Please select the language of the PVR. Select
Menu
on the remote control >
Settings
>
General
>
Display language
> Choose the preferred language and then
Save

If synchronization fails, repeat the steps from step 2. 

For help, visit telus.com/selfinstall
.

Yes