Enabling or disabling Nighttime Mode

Change your settings specifically for the evenings and nights

Want to disable your display, voices and/or chimes during the evening or at night? You can do this by enabling
Nighttime Mode
on your Control Panel. To turn on this setting, follow the instructions below.

  1. On your Control Panel, swipe down from the top of the screen

  2. Select
    Photo Frame

    Photo Frame
  3. Select

  4. Scroll to the bottom and select
    Nighttime Mode Settings
    to enable Nighttime Mode for your display, voices and/or chimes
    : To disable Nighttime Mode, uncheck all three settings.

  5. Select
    Nighttime Mode Start Time
    to select the desired start time

  6. Select
    Nighttime Mode End Time
    to select the desired end time

If you have any questions, please contact TELUS at

Did this article solve your problem?


Related articles

Arm or Disarm my system

How to Arm or Disarm your system using your Control Panel

How to use a Duress Code

Duress codes are used when you are being forced to operate your security system against your will

Bypass a sensor

Learn how to bypass a sensor

Change a sensor name

Customize your sensor names to better manage your security system

Learn about accessibility at TELUS