To set up or modify your guest network, you will have to log into your modem. In order to do so, type in 192.168.1.254 into the address bar of your web browser.
Use the username and password fields at the top right of the page to log in. The username is
admin
and the password is
telus
unless you have changed the default settings. If you have previously changed the default settings and can’t remember your password, you will have to
restore your router to default settings
.
Once you have logged in, click on the
Wireless
tab at the top.
On the
wireless settings page
, select the
Additional WLANs
tab.
Then, click on the icon under
Modify
on the right side of the page on the same line as Guest1 SSID. See the red box below.
On this page, you will be able to enable and customize your guest network settings.
Wireless Network Name (SSID):
If you would like to create a custom network name for the guest network, you can customize it here. Make sure the name has the words “Guest” on it for your reference. If you do not want to create a custom network name, leave this field as is.
Client Isolation:
Checked
MBSSID/LAN Isolation:
Checked
Enhanced Multicast Forwarding:
Unchecked
Security Mode:
Mixed WPA2-PSK/WPA-PSK
Generate password automatically:
Unchecked
Password:
Click on the textbox and type in the password you would like to use for your guest network. It is recommended this password is not the same as your main network password.
Group Key Update Timer:
1800
When you are done, press “Apply’ to complete the guest network setup.
