If you have an Actiontec T1200H or T2200H Modem, you can create a guest network.
To set up or modify your guest network, you need to log into your modem by entering
192.168.1.254
into the address bar of your web browser.
To log in to your modem, find the admin login information located on the sticker on the side of the modem. Enter the information in the username and password fields at the top right of the page.
Once you have logged in, select the
Wireless Setup
tab at the top.
You will now be able to enable and customize your guest network settings.
Select SSID
: Select TELUS1234-
Guest
-2.4G (or 5G). The “1234” digits will differ according to your modem
SSID Name
: If you would like to create a custom network name for the guest network, you can customize it under the SSID Name section. Make sure the name has the words “
Guest
” on it for your reference. If you do not want to create a custom network name, leave this field as is
Security Key Type
: Select “Use Custom Key/Passphrase”. Then click on the textbox below and type in the password you would like to use for your guest network. It is recommended this password is not the same as your main network password
When you are done, select
Apply
to complete the guest network setup.
Example:
