Connect a Satellite receiver to your TV
Instructions for connecting a Satellite receiver
What you need: A TELUS Satellite TV receiver, and a HDMI cable.
If you don't have an HDMI cable, you can use: a component cable set (red, green, blue), plus a composite cable set (red, white, yellow).
On the back of your
satellite receiver
and
TV
, connect the HDMI cable. If you don't have an HDMI cable, you can use composite and component cables instead:
On the back of your
satellite receiver
and
TV
, connect the
component
cable to the connector's coloured
red
,
green and blue
On the back of your
satellite receiver
and
TV
, connect the
composite
cable set to the connector's coloured
red and white
. The yellow connection is not used.
On your
TV's remote control
, press one of the following buttons (depending on the make and model of your TV):
Change the TV input/source to
HDMI
or
Component
, depending on the type of cable used. You may need to press the button more than once
To learn more, refer to the TELUS Satellite TV
user guide
.
Note:
Some TVs may have multiple component inputs and may be identified differently depending on the TV brand. Check your TV user guide.