You're currently in Personal Support. If you're a Business customer, visit our
Business Support page.

Configure my chime settings

Customize the volume and sound of your chimes.

To configure your sensor chime settings, follow the instructions below.

Customize the volume and sound of your chimes using the Control Panel

  1. On your Control Panel, from the dropdown menu select
    Settings
    .
    The “Settings” pop-up screen on the Control Panel display.” max-width=

  2. Select
    Advanced Settings
    and enter your master code.
    The “Advanced Settings” option and gear icon shown on the Control Panel.” max-width=

  3. Select
    Sound
    .
    The “Sound” option and audio speaker icon shown on the Control Panel.” max-width=

  4. To modify chime settings for a specific sensor, select
    Edit Chimes
    . Next, select the pencil icon next to the desired settings to configure.
    The “Edit Chimes” option highlighted in the Sound settings.” max-width=

  5. If you want to enable or disable all of your sensor chimes, scroll to the bottom. Under Chime Settings, check or uncheck the checkbox to enable/disable your chimes.
    All Chimes and Sensor Chimes option highlighted in the Chime Settings screen.” max-width=

If you have any questions, please
contact us
.

Did this article solve your problem?

Yes
No

Related articles

How to Arm or Disarm your system using your Control Panel

Duress codes are used when you are being forced to operate your security system against your will

Learn how to bypass a sensor

Customize your sensor names to better manage your security system

Learn about accessibility at TELUS