Android Wi-Fi Calling explained

Information about the TELUS Android Wi-Fi Calling service

Wi-Fi Calling is a feature that allows you to call and message (text and multimedia) over Wi-Fi when you have little or no cellular coverage. You can use Wi-Fi Calling to call and message as you do on the cellular network, even if the person on the other end is not using Wi-Fi Calling.

What you need

You will need the following:

  • LG G6
    Note: Currently Android Wi-Fi Calling is only available on the LG G6 but more phones will be added soon.
  • A TELUS wireless monthly plan (not available on prepaid plans)
  • Android version 7.0 and up, and software version H87315C and up
  • LTE SIM
  • An active My Account subscription
  • You will also need Wi-Fi connection that allows Voice over IP calling (VoIP)
    Note: A minimum speed of 1 Mbps is recommended. Slow speeds will affect the quality of the call.

Turn on Wi-Fi Calling

  1. Open Phone then Settings.
  2. Select Call Settings.
  3. Turn on Wi-Fi Calling.
  4. Enter phone number, you will be sent a text message containing a 6 digit one-time passcode.
  5. Enter the 6 digit one-time passcode.
  6. You will need to read and accept the Wi-Fi Calling Terms and Conditions.
  7. Enter your Emergency 911 Address.
  8. Close your browser.

Call and text message over Wi-Fi

When Wi-Fi calling is turned on you can call and message as you do normally and your phone will automatically use an available Wi-Fi network if it determines that you have low or no cellular coverage.

When moving out of cellular coverage, if you are making a call, your device will automatically switch to Wi-Fi without interrupting the call when in VoLTE coverage*. If not in VoLTE coverage, your call will drop if you move out of Wi-Fi connectivity while on a Wi-Fi call.

*Note: VoLTE is available across Canada except for Saskatchewan and parts of Manitoba.

Wi-Fi Calling locations

Wi-Fi Calling is only available in Canada. When outside Canada, your phone will not allow Wi-Fi calling or messaging.

How to tell if you are using Wi-Fi calling

Once you see the Wi-Fi calling icon on the status bar of your device, you can make a Wi-Fi call. Wi-Fi Calling uses the same native dialler and contact list on your device as for cellular, for your convenience.

Wi-Fi Calling cost

Calls and messages are billed the same as over cellular, and there is no additional cost to enable Wi-Fi Calling. All incoming calls and messages received over Wi-Fi Calling while in Canada, and all outgoing calls and messages sent over Wi-Fi Calling while in Canada to a Canadian number, will be deducted from your monthly voice allowance and any overage will be rated according to your wireless plan. All outgoing calls and messages sent over Wi-Fi Calling while in Canada to a non-Canadian number will be charged according to your monthly allowance including applicable overage pay-per-use rate, and long distance service will be charged according to your wireless plan. Wi-Fi Calling will not use up data from your wireless plan.

9-1-1 over Wi-Fi

For the most reliable 9-1-1 experience, we strongly recommend you place 9-1-1 calls using the mobile network or a landline if available.

Important: If you must call 9-1-1 over Wi-Fi, your call will be answered by a specialized operator who will ask you to confirm your location and route your call to the correct regional Public Safety Answering Point (PSAP). It is important to remember that In the event that you are unable to speak with the operator, the address you entered in your phone Wi-Fi Calling settings menu will be shared with the operator. Unfortunately it is not possible to determine your device location when making a 9-1-1 call over Wi-Fi.

Be sure to keep your Emergency 9-1-1 Address up-to-date (from your phone Wi-Fi Calling settings menu) to ensure emergency services has accurate information to locate you in case of an emergency.

Note: Text 9-1-1 (T911) is not supported over Wi-Fi at this time.

For more information visit Wi-Fi Calling Explained

Did this solve your issue?

Yes No

Please do let us know, we're updating support articles all the time.

Thank you for your feedback

Why didn't this content help?

How can we improve the content of this article?

Remaining characters: 250

Other ways to get support