Below are the steps to change the Master Code on your panel:
To assign a user or revise a User Code, select the desired option then select
Edit
or
Add new
Select
Name
and assign a personal name to this user. Select
Save
*The default User description is displayed.
Select
User Code
to assign a 4-digit code to this user
Assign 4-digit code to this user and select
Save
Select the applicable Partitions for this user (if applicable)
Select
Authority level
(if applicable)
Select
Authority level for this user
(if applicable). Select
Save
Ademco, Honeywell, First Alert
Enter 4-digit Master Code _ _ _ _
Enter new 4-digit Master Code two times
DSC Classic Series (1550, 2550, 3000)
Enter 4-digit Master Code _ _ _ _
Enter new 4-digit Master Code
DSC Power Series (1555, 5010, 864, 1832, 1864, Envoy, Alexor, Neo)
Enter 4-digit Master Code _ _ _ _
Enter new 4-digit Master Code
GE Simon Systems 1, 2 and 3
Open Panel (cover on keypad)
Use red numbered keys and follow voice prompts
Enter 4-digit Master Code _ _ _ _
Panel will respond with "Master Code, press again for next access code or Done to select or Cancel to quit"
Enter new 4-digit Master Code
Scroll to
System programming
and press
Enter
Enter the 4-digit Master Code and press
Enter
Scroll to
Access Codes
and press
Enter
Scroll to
Master Code
and press
Enter
The current value of the code will flash on the display
Enter a new 4-digit Master Code and press
Enter
Press
Status
repeatedly to exit
Use the down arrow until
System programming
is displayed and select
Enter the Master Code then select
OK
Select
Access Codes
and press on white field next to current code
Enter the new Master Code
Select
Save
and press
Close
to return to main menu
Press
#
(pound key) again to display current code
Press
#
(pound key) to accept
Press
*
(asterisk key) until Exit is displayed and press
#
(pound key) to confirm
Enter Master Code _ _ _ _
Enter new 4-digit Master Code
Paradox Esprit 718, 728, 738, 748
Paradox Specra 1728, 1738, 1748
Enter 3-digit position number
Enter new 4 to 6 digit Master Code
Select
Security
>
Menu
>
Toolbox
Select
User management
, then
Master user
Enter new Master Code and press
OK
Enter new Master Code again and press
OK
Scroll to page 2 of the Home Screen
Enter 4-digit Master Code