Add your camera using the MAC address

How to add your camera using the MAC address

If you are re-adding a camera to your TELUS SmartHome Security system and it is not showing up automatically, you can add the device to your system using the MAC address located on the device.

1

To add a device using the MAC address, follow the steps below:

  1. Login to the
    web portal

  2. Click
    Video

  3. Click
    Settings

  4. Click
    Add Camera
    or
    Add Video Device

  5. Enter the MAC address and click
    Find

2

TELUS SmartHome will find your camera as long as it is already connected to the Internet.

Did this article solve your problem?

Yes
No

Related articles

Installing your Doorbell Camera

Install your Doorbell Camera using these instructions

Installing your Indoor Camera (V522 model)

Follow these instructions to install your V522 Indoor Camera

Installing your Indoor Camera (V523 model)

Install your V523 Indoor Camera using these instructions

Installing your Outdoor Camera (V723 model)

Install your v723 Outdoor Camera using these instructions

Installing your Outdoor Camera (V722 model)

Install your V722 Outdoor Camera using these instructions