Skip to content
TELUS Logo

Program your Slimline remote for Optik TV

How to program the TV and Aux button

Not your remote?

Before you begin


Locate the remote codes your remote

Slimline 1 [Ver 1]

Slimline 1 [Ver 2]

Slimline 2

AHS / Hospitality remote control

Program the TV button


If you need to reprogram your remote, use the remote code tool to find the right device code for your TV. Once you have a code, proceed to step 1.

Alternatively, use the user guide that came with your remote or use the download at the bottom of this page.

  1. Press the mode button until the red TV light on your remote flashes

  2. Press and hold the Options button for 3 seconds, until the TV light flashes twice

  3. Enter the code from the Remote code tool for your television. The light will flash twice.

  4. Press and hold the Power button. When your TV switches off, remove your finger from the button

  5. Press OK. The red TV light will flash twice

  6. Press the Power button again to switch your TV back on

  7. Press the mode button until the green OPTIK light is illuminated at the top of your remote

  8. Press the TV power button again to switch your TV back on

  9. If you do not find a code that works for you try the following code: Press and hold mode until the TV or Aux light flashes twice

  • Enter the code 29 for TV and your remote will search for a code that may work.
    Note: This may take up to 15 minutes. The TV or aux light will flash. Press okay and then the TV should be synced
  • For DVD and blue ray enter 44
  • For Amplifiers enter 79

Program the Aux button


Use the Remote code tool to find the device code for your device. Once you have a code, proceed to step 1.

Alternatively use the user guide that came with your remote or use the download at the bottom of this page.

  1. Press the Mode button until the yellow AUX light on your remote flashes
  2. Press and hold the Options button for 3 seconds, until the AUX light flashes twice
  3. Check the user guide that came with your remote (or download a PDF of the codes) and find the code for your specific device
  4. Enter the code for your device brand. The AUX light will flash twice
  5. Press and hold the Power button. When your device turns off, release the button
  6. Press OK. The yellow AUX light will flash twice
  7. Press the Power button again to turn on your device
  8. Press the Mode button until the green OPTIK light at the top of your remote is lit

Downloads


Slimline Remote Additional Codes

Purchase a new Optik remote


Remote not working as it should? It might be time to replace it. Learn more about options to purchase a new Optik remote.

Search Support