Managing Boost Wi-Fi with My Wi-Fi App

To pause (or resume) Wi-Fi on your Boost Wi-Fi network, follow these instructions:

1. Open the My Wi-Fi app
2. In the Overview tab, select Pause Wi-Fi in the upper right-hand corner. This will also pause the Wi-Fi connection to any device further connected from your Boost Wi-fi. Note: If you subscribe to Optik TV, it will continue to work even after your pause Wi-Fi

3. In order to turn your Boost Wi-Fi network back on, select Pause Wi-Fi in the upper right-hand corner of the homepage and then unpause the desired Boost or device

To change the brightness of your Wi-Fi Boost’s LED status light to your preference, follow these instructions:

1. Open the My Wi-Fi app
2. From the Overview page, enter the top-right menu
3. Go to Settings > Wi-Fi Boost settings
4. Select LED brightness

5. Select the desired brightness (either Off, Medium or High). Changes will be saved automatically and updated right away

6. In the "Off" mode, the LED will not show any status unless there is a problem, at which time the LED will turn back on to show that status

To change your Wi-Fi network name and password, follow these instructions:

1. Open the My Wi-Fi app
2. Navigate to the Wi-Fi tab
3. Select Edit
4. Change your Wi-Fi network name or password to your new desired network name or password. Select Save
5. If you are prompted, enter the admin password present on the back of your Boost Wi-Fi that is connected to your modem. If you have entered the admin password for your Boost Wi-Fi system previously, you will not be asked to re-enter it

Note: Once you change your Wi-Fi network name or password, you will need to reconnect all of your Wi-Fi connected devices using the new network settings. This includes mobile devices, printers, tablets, etc.