You're currently in Business Support. For help with a consumer service, visit our

newNotificationBanner

To install your Control Panel, make sure you have the following in addition to the included equipment:
- Broadband internet connection with Wi-Fi router
- Wi-Fi network name and password
- Master code (will be used for arming and disarming your security system)


Install your Control Panel (Gen 2) / Pre-installation checklist

Before powering up the Control Panel, follow the step-by-step guide included inside the box to begin the installation of your Control Panel using the TELUS Secure Business app.

Follow the instructions in the mobile app. Once you have reached the step to install your Control Panel, you will be shown how to:
- Power up the panel
- Connect to your Wi-Fi network using the panel
- Conduct a system check using the panel


Install your Control Panel (Gen 2) / Installing your Control Panel using the mobile app

Choosing the location of your Control Panel is an important decision because the rest of the system will be designed and tested to work with the device in that location. Any movement of the Control Panel after the installation should be kept to a minimum.

Here are some tips for selecting the location of your Control Panel:
- Make sure this is a convenient location in your business - usually near the main entrance
- Your Control Panel should be in close proximity to a power outlet
- The location should be within Wi-Fi range

__Note__: If you are experiencing connectivity problems after your installation, double check your Control Panel has not been moved. If yes, make sure the panel is relocated back to the original location and see if this resolves your issues.


Install your Control Panel (Gen 2) / Where to place your Control Panel

### Power up your control panel
1. Let’s start by connecting your power<img src="//images.ctfassets.net/9mt4r6ro1ay9/6n8MZQXraeGECEzeOJA28F/94ae16f3aa185911708cd021e2eb6f70/1.png" width="788" height="auto" alt="TSB - Control Panel - Step 1" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">
2. Next, put on your cover and attach the table stand<img src="//images.ctfassets.net/9mt4r6ro1ay9/taSKhfPhiUBUNX5SgzGkH/fd88fae45bf7700ec0ff03ad23b92be0/2.png" width="784" height="auto" alt="TSB - Control Panel - Step 2" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">
3. Plug in your control panel, then power it on<img src="//images.ctfassets.net/9mt4r6ro1ay9/2dDnIVnIsMFHpJYN0spHF5/baa8e368499ac1815cfb1db153494808/3.png" width="783" height="auto" alt="TSB - Control Panel - Step 3" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">

### How to use your Control Panel
To familiarize yourself with your new Control Panel, see [Using your Secure Business Control Panel](https://www.telus.com/en/business/support/interstitial/telus-secure-business-control-panel).


Install your Control Panel (Gen 2) / Troubleshooting your Control Panel

Install your Control Panel

Install your Control Panel / Child Article Config

Install your Control Panel / Child Article Config / Image

Install your Control Panel / SEO

Find step-by-step video instructions, helpful tips and important things to know about installing your TELUS Secure Business Control Panel/

Install your Control Panel | Support | TELUS Business

Find step-by-step video instructions, helpful tips and important things to know about installing your TELUS Secure Business Control Panel.

For further assistance on how to install your Door and Window Sensor, please watch the video below:

[youtube:id:csTvQPkZaQ0]

Install your door/window sensors / Video installation instructions

To install your Door and Window Sensors, make sure you have the following in addition to the included equipment:

- 4mm flat screwdriver

Install your door/window sensors / Pre-installation checklist

__If this is the first time you are installing the TELUS Secure Business system__, before you install your sensors, make sure to follow the step-by-step guide included in the box first. After you complete these steps and successfully set up the Control Panel, you can then add more devices to your account.

If this is a new installation, you should follow the instructions included inside the box containing your equipment to initiate step-by-step guidance for installation in the TELUS Secure Business app.

To add a sensor to your security system, use your TELUS Secure Business app and follow these instructions here:

1. Log in to the __TELUS Secure Business app__ on your mobile device.
2. Select __More__ at the bottom right-hand corner.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/3xq4YtlLtjmqtjLZVrInAQ/47c51d458bb7767b0b96c1f2d045d3cc/Install_your_Door_and_Window_Sensor-B2B--Step_2-EN.jpg" alt="An arrow pointing at the Menu option that is located at the bottom right-hand corner in the TELUS Secure Business app." max-width="250"]
3. Select __+ Add Device__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/1HVFu7ZEx66i6XqWrqCzZl/941d7826e15b003ad2e05913e36e0851/Install_your_Door_and_Window_Sensor-B2B-Step_3-_EN.jpg" alt="An arrow pointing at the + Add Device option under the Account menu in the TELUS Secure Business app." max-width="250"]
4. Select __Security__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/7zIISLn3YAlSJmkuEmsGsh/3c9db79979797543e4573c2a9c851280/Install_your_Door_and_Window_Sensor-B2B-Step_4-_EN.jpg" alt="An arrow pointing at the Security option under the Add Device menu in the TELUS Secure Business app." max-width="250"]
5. Select your device and follow the on-screen instructions to complete the setup.

Once all of your sensors are added successfully, you will be shown how to complete a walk test to confirm that each sensor is working as expected. If you experience any issues at any time during your installation, please [contact us](https://www.telus.com/en/business/small/contact-telus#Phone).

Watch the video below on how to complete a security system walk test:

[youtube:id:LbvdajoXAaU]


Install your door/window sensors / Installing your sensor using the mobile app

### I'm unable to add the sensor to my TELUS Secure Business system

If you are unable to add the Door and Window sensor, try resetting your sensor by removing the cover of the device. Next, press and hold the __round button__ in the middle of the circuit board for approximately 10 seconds until the LED starts flashing red. This will reset the device and you can now re-add your sensor.

### Where should I install my Door and Window Sensor?

Your Door and Window Sensor should be placed on non-metallic doors or frames only. Metallic doors or frames can cause interference between the sensor and the Control Panel and is not recommended.

A Door and Window Sensor should be located inside your business premises on a clean surface area. Make sure you wipe the location before installing your sensor.

### How do I mount the Door and Window Sensor with the double-sided adhesive tape?

1. Peel the release liners off the two strips of double-sided adhesive tape and attach the tape to the back of the device and the magnet.<img src="//images.ctfassets.net/9mt4r6ro1ay9/5HLAV5QfKnP6r4FHigh4T9/fca4014eac009640378232dd65f80b8c/7.png" width="234" height="auto" alt="Install your door/window sensors with tape / Troubleshooting your Door and Window Sensor / Step 1" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">
2. Place the device on the frame of a window or door and place the magnet on the moving surface of the door or window itself, directed according to the location marks.<img src="//images.ctfassets.net/9mt4r6ro1ay9/2GfL0nZoOT36c31fnOSG3O/31f3a0f618b8d7c775423ae5fa8af031/8.png" width="237" height="auto" alt="Install your door/window sensors with tape / Troubleshooting your Door and Window Sensor / Step 2a" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;"><img src="//images.ctfassets.net/9mt4r6ro1ay9/nL8nkbkZxcdmMZADU7cwO/bcbd861d8b23967c2e513cd26a20cb7f/9.png" width="183" height="auto" alt="Install your door/window sensors with tape / Troubleshooting your Door and Window Sensor / Step 2b" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">

### How do I mount the Door and Window Sensor with screws?

1. Insert a coin in the slot and twist to remove the cover. If a coin is not available, insert a 4mm flat screwdriver into each slot of the plastic cover and twist to open each side.<img src="//images.ctfassets.net/9mt4r6ro1ay9/3ZNaTZWM6uoCc666Q20wHP/7c748a0319efdc548a5075c1861ee5bf/10.png" width="400" height="auto" alt="Install your door/window sensors with screws / Troubleshooting your Door and Window Sensor / Step 1" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">
2. Screw the device base onto the door frame.
3. Peel the release liner off the strip of double-sided adhesive tape and attach the tape to the back of the magnet.
4. Place the magnet on the moving surface of the door or window itself, directed according to the location marks.<img src="//images.ctfassets.net/9mt4r6ro1ay9/7uHlwhmGDsXsinXkcfsoqV/c3efa92ffd48939be8e8193e38d0c178/11.png" width="324" height="auto" alt="Install your door/window sensors with screws / Troubleshooting your Door and Window Sensor / Step 4a" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;"><img src="//images.ctfassets.net/9mt4r6ro1ay9/6JY88FPk51aubDpLkiGMNu/726169f6ac4c3902557db2f5b37c6ad7/12.png" width="237" height="auto" alt="Install your door/window sensors with screws / Troubleshooting your Door and Window Sensor / Step 4b" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">

### My Door and Window Sensor is failing the walk test

If you are testing your sensor using the TELUS Secure Business mobile app and the device is consistently failing to pass the walk test, it is possible that you entered an incorrect sensor ID at an earlier stage or that the sensor is malfunctioning.

Please [contact us](https://www.telus.com/en/business/small/contact-telus#Phone) to resolve the issue and complete your installation.


Install your door/window sensors / Troubleshooting your Door and Window Sensor

Install your Door and Window Sensor for TELUS Business customers

Install your Door and Window Sensor / SEO

Find step-by-step instructions, helpful tips and important things to know about installing your TELUS Secure Business Door and Window Sensor.

Install your Door and Window Sensor | Support | TELUS Business

Find step-by-step instructions, helpful tips and important things to know about installing your TELUS Secure Business window and door sensors.

Install your Door and Window Sensor

Install your Door and Window sensors

For further assistance on how to install your Motion Sensor, please watch the video below:

[youtube:id:2exAuYRUntM]

Installing your Motion Sensor / Video installation instructions

__If this is the first time you are installing the TELUS Secure Business system__, before you install your sensors, make sure to follow the step-by-step guide included in the box first. After you complete these steps and successfully set up the Control Panel, you can then add more devices to your account.

If this is a new installation, you should follow the instructions included inside the box containing your equipment to initiate step-by-step guidance for installation in the TELUS Secure Business app.

To add a sensor to your security system, use your TELUS Secure Business app and follow these instructions here:

1. Log in to the __TELUS Secure Business__ app on your mobile device.
2. Select __More__ in the bottom right-hand corner.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/3OGEBEvj5inis88JzpHwyx/9e233b068791ae81b1cd9d56b5847b5f/Installing_your_Motion_Sensor-B2B--Step_2-EN.jpg" alt="An arrow pointing at the Menu option that is located at the bottom right-hand corner in the TELUS Secure Business app." max-width="250"]
3. Select __+ Add Device__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/7IGtq1JXj4BoiTMmAVtccl/167b583cb58d7d11f614aa778e12d42a/Installing_your_Motion_Sensor-B2B-Step_3-_EN.jpg" alt="An arrow pointing at the + Add Device option under the Account menu in the TELUS Secure Business app." max-width="250"]
4. Select __Security__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/6CM9xhNL7gZtNiwMm7A3OB/5a4b20641997de1c682d3abd2bafdcb8/Installing_your_Motion_Sensor-B2B-Step_4-_EN.jpg" alt="An arrow pointing at the Security option under the Add Device menu in the TELUS Secure Business app." max-width="250"]
5. Select your device and follow the on-screen instructions to complete the setup.

Once all of your sensors are added successfully, you will be shown how to complete a __walk test__ to confirm that each sensor is working as expected. If you experience any issues at any time during your installation, please [contact us](https://www.telus.com/en/business/small/contact-telus#Phone).

Watch the video below on how to complete a security system walk test:

[youtube:id:LbvdajoXAaU]


Installing your Motion Sensor / Installing your Motion Sensor using the mobile app

### I am unable to add the sensor to my TELUS Secure Business Security system

If you are unable to add your Motion Sensor (i.e. you tried adding the sensor multiple times already or more than 30 minutes has passed since removing the battery tab), try resetting your sensor by removing the cover of the device. Next, press and hold the yellow button that is next to the battery for about 10 seconds until the LED starts flashing red. This will reset the device and you can now re-add your sensor.

### Where should I install my Motion Sensor?

Your Motion Sensor should be installed on a clean surface area inside your business premises. Make sure you wipe the location before installing your sensor. Other best practices include:

- Keeping the sensor away from heat sources, air drafts and direct sunshine.
- The sensor should be mounted on a solid stable surface.
- The sensor will work at operating temperatures between -10° to 50°C.

### How do I install a pet shield for my Motion Sensor?

The Motion Sensor has a built-in pet shield that can ignore motions from pets that weigh up to 38 kg (85 lbs). If you have pets, leave the pet shield attached.
<img src="//images.ctfassets.net/9mt4r6ro1ay9/64t7jCN2h05VgbHPWvfeoP/cc22e6da4cdbdb07a0607c696d7b976d/15.png" width="565" height="auto" alt="15" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">

### How to mount my Motion Sensor

<img src="//images.ctfassets.net/9mt4r6ro1ay9/2ir3NxPPI3Tq2dgteqyMLW/7f7157edfd91e7088037ac8036c0b052/14.png" width="424" height="auto" alt="TSB Motion Sensor Diagram" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">

1. Mount the bracket on the wall<img src="//images.ctfassets.net/9mt4r6ro1ay9/6Usc4tmg9o7nkgCBSfIIKS/840787131bf2e571850b92679a9e9024/16.png" width="531" height="auto" alt="Motion Sensor - Step 1" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">
2. Align the sensor with the bracket. Slide the sensor upward till you hear a click<img src="//images.ctfassets.net/9mt4r6ro1ay9/2TBBymUxMdtwEmUm34iZHp/080a9e1b760632a4cd4f0b971bb562ac/17.png" width="268" height="auto" alt="Motion Sensor - Step 2" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;"><img src="//images.ctfassets.net/9mt4r6ro1ay9/3R61vzFIs8KEjuGhPsEzOU/de2ad001f73f626176dfc7a0b6f899b9/18.png" width="395" height="auto" alt="Motion Sensor - Step 3" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">
3. Press the tab at the bottom of the device and separate the cover from the base<img src="//images.ctfassets.net/9mt4r6ro1ay9/3R61vzFIs8KEjuGhPsEzOU/de2ad001f73f626176dfc7a0b6f899b9/18.png" width="395" height="auto" alt="Motion Sensor - Step 3" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">
4. Insert the battery. Pay attention to the polarity<img src="//images.ctfassets.net/9mt4r6ro1ay9/3WxprvEDPuQpalWyOsoYwP/e46ff3c861489a346706ccb98f3481a2/19.png" width="578" height="auto" alt="Motion Sensor - Step 4" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">
5. Snap cover back onto base<img src="//images.ctfassets.net/9mt4r6ro1ay9/7lQAyRUfpctvQLEXKo80eH/03732589af152af67d688d2ea6cc06a7/20.png" width="267" height="auto" alt="Motion Sensor - Step 5" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">
6. Secure the Motion Sensor with the screw at the bottom<img src="//images.ctfassets.net/9mt4r6ro1ay9/1CG9P3Y9yHEattbrhfMnXx/f092267352ffd14bedfe1571f58761b8/21.png" width="204" height="auto" alt="Motion Sensor - Step 6" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">
7. Align the sensor with the bracket
8. Slide the sensor upward until you hear a click<img src="//images.ctfassets.net/9mt4r6ro1ay9/6421r81di02jOxXYISqS8P/9b5a865d481692e29195180c06c1ae44/22.png" width="372" height="auto" alt="Motion Sensor - Step 8" loading="eager" style="border-radius: 4px; height: auto; max-width: 100%;">

### My Motion Sensor is failing the walk test

If you are testing your sensor using the TELUS Secure Business mobile app and the device is consistently failing to pass the walk test, it is possible that you entered an incorrect sensor ID at an earlier stage or that the sensor is malfunctioning.

Please [contact us](https://www.telus.com/en/business/small/contact-telus#Phone) to resolve the issue and complete your installation.


Installing your Motion Sensor / Troubleshooting your Motion Sensor

Installing your Motion Sensor for TELUS Business customers

Installing your Motion Sensor / Child Article Config

Installing your Motion Sensor / Child Article Config / Image

Installing your Motion Sensor for TELUS Business customers / SEO

Find step-by-step instructions, helpful tips and important things to know about installing your TELUS Secure Business Motion Sensors.

Install your Motion Sensor | Support | TELUS Business

Installing your Motion Sensor

Motion Sensor

Install your Smoke Detector

Install your Smoke Detector / Child Article Config

Install your Smoke Detector / Child Article Config / Image

Install your Smoke Detector / SEO

Find step-by-step instructions, helpful tips and important things to know about installing your TELUS Secure Business Smoke Detector.

Install your Smoke Detector | Support | TELUS Business

Smoke Sensor

Install your Carbon Monoxide Detector (CO)

Installing your Carbon Monoxide Detector / Child Article Config

Installing your Carbon Monoxide Detector / Child Article Config / Image

Install your Carbon Monoxide Detector / SEO

Find step-by-step instructions, helpful tips and important things to know about installing your TELUS Secure Business Carbon Monoxide Detector

Install your Carbon Monoxide Detector | Support | TELUS Business

Find step-by-step instructions, helpful tips and important things to know about installing your TELUS Secure Business Carbon Monoxide Detector.

CO Detector

Install your 4-Button Key Ring Remote

Install your 4-Button Key Ring Remote / Child Article Config

Install your 4-Button Key Ring Remote / Child Article Config / Image

Install your 4-Button Keyring Remote / SEO

Find step-by-step instructions, helpful tips and important things to know about installing your TELUS Secure Business 4-Button Keyring Remote

Install your 4-Button Keyring Remote | Support | TELUS Business

4-button key fob

Interstitial / Security device installation guides / SEO

Step-by-step instructional guides to help set up your TELUS Secure Business services. 