How to use Bluetooth Disarm

With the new security system, you are now able to pair up to 5 devices to your security panel for auto-disarm capability. You can also pair a phone to a specific Partition if you have Partitions set up for your business.

Enabling this capability will allow you to auto-disarm your system when you get within 15 feet of your security panel. If you have a smart lock, you may be able to set up a rule to auto-unlock your door as well.

To pair your phone to your Control Panel using Bluetooth:

1. Before you begin, make sure Bluetooth is turned On and enabled on your phone

2. Swipe down from the top of your control panel screen to access the settings page

3. Select Settings

   

4. Select Advanced Settings

   

5. Type in your master code

6. Select Bluetooth Devices

   

7. Select Add Device

   

8. Select your device from the Control Panel

   

9. Select Pair

10. Input the code into your phone when prompted

11. If you have Partitions set up, you can select the specific Partition the phone should be paired with. Learn more about how to set Partitions

12. Make sure Bluetooth remains On for your device to disarm your system in the future

Warning: Pairing a mobile device that is not on the following list may cause your security system to auto-disarm if your phone is left within the vicinity of the security. Make sure you only pair one of the following compatible mobile devices.

• iPhone 5

• iPhone 5s

• iPhone 6

• iPhone 6s

• iPhone 7

• iPhone 8

• iPhone X

• Samsung Galaxy Note 3

• Samsung Galaxy Note 5

• Samsung Galaxy S4

• Samsung Galaxy S5

• Samsung Galaxy S6

• Samsung Galaxy S7

• Samsung Galaxy S8

• LG Nexus 5

• LG Nexus 5x

• LG G3

• Huawei Nexus 6p

• HTC 10

• Google Pixel XL

• Google Pixel 2 XL

• OnePlus One

• OnePlus One 3

• OnePlus One 3T