Create a guest network (Actiontec T1200H/T2200H)

Create a guest network on Actiontec T1200H/T2200H modems to securely share internet access with friends.

Not your modem?

A guest network is a secondary network that provides secure internet access for your guests. This network can have a different password from your main network. Devices connected to the guest network will be able to access the internet, but not other shared files, printers, network storage, etc.

Guest Network Setup (Actiontec T1200H/T2200H)

If you have an Actiontec T1200H or T2200H Modem, you can create a guest network.

To set up or modify your guest network, you need to log into your modem by entering into the address bar of your web browser.

To log in to your modem, find the admin login information located on the sticker on the side of the modem. Enter the information in the username and password fields at the top right of the page.

Note: If you have previously changed the default settings and can’t remember your password, you will have to reset your router to default settings.

Once you have logged in, select the Wireless Setup tab at the top.

You will now be able to enable and customize your guest network settings.

  1. Wireless Radio: Enable
  2. Select SSID: Select TELUS1234-Guest-2.4G (or 5G). The “1234” digits will differ according to your modem
  3. SSID State: Enable
  4. SSID Guest: Enable
  5. SSID Broadcast: Enable
  6. SSID Name: If you would like to create a custom network name for the guest network, you can customize it under the SSID Name section. Make sure the name has the words “ Guest ” on it for your reference. If you do not want to create a custom network name, leave this field as is
  7. Security: WPA2
  8. WPA Type: WPS2
  9. Encryption Type: AES
  10. Security Key Type: Select “Use Custom Key/Passphrase”. Then click on the textbox below and type in the password you would like to use for your guest network. It is recommended this password is not the same as your main network password

When you are done, select Apply to complete the guest network setup.


Did this article solve your problem?

Search Support