Change your Wi-Fi network’s name and password - Actiontec T3200M

Change your Wi-Fi network’s name and password - Actiontec T3200M / Child Article Config 

Telust3200M Whbg

Your Actiontec T3200M wireless gateway includes a preconfigured Wi-Fi network. The name (SSID) and password of your Wi-Fi network are printed on a label affixed to the side of your wireless gateway.

To configure a customized and secured Wi-Fi network:
- Connect your computer directly to the gateway using an Ethernet cable.
__OR__
- Connect your gateway over your preconfigured Wi-Fi network.

If you would like to change the default network name and password, follow these steps:

1. Launch your Web browser and enter the address **http://192.168.1.254/** in the address bar
2. On the gateway’s login page, enter the **administrator’s username and password** (this information is found on your modem)
3. On the next screen, select **Wireless Setup**. You will be redirected to the **Basic Settings screen**
4. Change the **SSID Name,** entering a customized network name or that of the old equipment you have just replaced. This will save you from having to reconfigure all of your wireless devices for the new work
5. Select the **Use Custom Key/Passphrase** box, then clear the corresponding text box.
6. Next, enter the desired password or that of the old equipment you have just replaced (8 to 63 characters).
7. Select **Apply**

It should take around 30 seconds to apply the new settings. If you are using the credentials from your old equipment, your devices should automatically recognize them and connect to the network. If you are using new credentials, you will have to connect your devices to the new customized network.

__Notes__: 
- You may also need to reset your modem. You can find the instructions here: [Reset an Actiontec T3200M modem](https://www.telus.com/en/business/support/article/reset-your-actiontec-t3200m-modem "Reset an Actiontec T3200M modem")
- Restarting or resetting your modem may only provide a temporary fix to your problem, if you find the issue reoccurs [contact us](https://www.telus.com/en/business/small/contact-telus) in order for us to find and fix the root cause of your problem

Change your Wi-Fi network’s name and password – Actiontec T1200H or T2200H / SEO

Learn how to change your Wi-Fi network name and password for Actiontec T3200M

Change your Wi-Fi network’s name and password – Actiontec T3200M | Support | TELUS Business

Configure a customized and secured Wi-Fi network on the Actiontec T3200M

t3200

Change your Wi-Fi network’s name and password – Actiontec T1200H or T2200H

Change your Wi-Fi network’s name and password - Actiontec T1200H or T2200H / Child Article Config

Actiontec T1200

Your Actiontec **T1200H or T2200H** wireless gateway includes a preconfigured home Wi-Fi network. The name (SSID) and password of your Wi-Fi network are printed on a label affixed to the side of your wireless gateway.

To configure a customized and secured Wi-Fi network, and connect to the Internet wirelessly, follow these steps using a wired Internet connection:

1. Open your Web browser
2. Enter the following in the address bar: **192.168.1.254**
3. Press the **Enter** key on your keyboard to display the __Home Screen__
4. To launch a session, enter the following information:
    - Username: **admin**
    - Password: The password is printed on the side of your gateway under **GUI Access** (unless you have changed it)
5. Select **Login** to display the **Welcome** screen
    - If this is the first time you have logged into your gateway, you will be asked if you would like to change your password
6. On the next screen, select **Wireless Setup** to display the **Basic Settings** screen
7. Complete the following fields:
    - Wireless Radio: Select **Enable**.
    - SSID Broadcast: Select **Enable**
    - SSID Name: The name you and others will see when searching for your wireless network
    - Security: For enhanced security, __WPA/WPA2__ is recommended
    - WPA Type: Select **WPA or WPA2 Personal**
    - Encryption: Select **All**
    - Security Key Type): Select **Use Custom Passphrase,** clear the corresponding text box, then enter your desired password (between 8 and 63 characters). 

    **Note:** Your password must consist of letters, numbers or a combination of both.
8. Select **Apply**
9. Reconnect your devices to your new customized network

Learn how to change your Wi-Fi network name and password for Actiontec T1200H or T2200H modems.

Change your Wi-Fi network’s name and password – Actiontec T1200H or T2200H | Support | TELUS Business

Configure a customized and secured Wi-Fi network on the Actiontec T1200H or T2200H

Change your Wi-Fi network’s name and password - Actiontec V1000H or V2000H

Change your Wi-Fi network’s name and password - Actiontec V1000H or V2000H / Child Article Config

Actiontec V1000H

Your Actiontec **V1000H or V2000H** wireless gateway includes a preconfigured Wi-Fi network. The name (SSID) and password of your Wi-Fi network are printed on a label affixed to the side of your wireless gateway.

To configure a customized and secured Wi-Fi network, and connect to the Internet wirelessly, follow these steps using a wired Internet connection:

1. Open your Web browser
2. Enter the following in the address bar: **192.168.1.254**
3. Press the **Enter** key on your keyboard to display the __Home__ screen
4. To launch a session, enter the following information:
    - Username: **admin**
    - Password: **The default password is the serial number of the gateway, printed on the side of the gateway** (unless you have changed it)
5. Select **Login** to display the **Welcome** screen
6. Select **No**, then **Apply** to display the __Home__ screen
7. On the next screen, select **Wireless Setup** to displau the **Basic Settings** screen 
8. Complete the following fields:
    - Wireless Radio: Select **Enable**
    - SSID Broadcast: Select **Enable**
    - SSID Name: The name you and others will see when searching for your wireless network
    - Security: For enhanced security, __WPA/WPA2__ is recommended
    - WPA Type: Select **WPA or WPA2 – Personal**
    - Encryption: Select **All**
    - Security Key Type: Select **Use Custom Passphrase**, clear the corresponding text box, then enter your desired password (between 8 and 63 characters)

   **Note:** Your password must consist of letters, numbers or a combination of both.
9. Select **Apply**.
10. Reconnect your devices to your new customized network

Change your Wi-Fi network’s name and password – Actiontec V1000H or V2000H / SEO

Learn how to change your Wi-Fi network name and password for Actiontec V1000H or V2000H modems.

Change your Wi-Fi network’s name and password – Actiontec V1000H or V2000H | Support | TELUS Business

Configure a customized and secured Wi-Fi network on the Actiontec V1000H or V2000H

Change your Wi-Fi network’s name and password - ZyXEL VSG-1432

Change your Wi-Fi network’s name and password - ZyXEL VSG-1432 / Child Article Config

Zyxel Vsg 1432

Your **ZyXEL VSG-1432** wireless gateway includes a preconfigured Wi-Fi network. The name (SSID) and password of your Wi-Fi network are printed on a label affixed to the side of your wireless gateway.

To configure a customized and secured Wi-Fi network, and connect to the Internet wirelessly, follow these steps using a wired Internet connection:

1. Open your Web browser
2. Enter the following in the address bar: **192.168.1.254**
3. Press the **Enter** key on your keyboard to display the **Home** screen
4. To launch a session, enter the following information:
    - Username: **admin**
    - Password: **telus** (unless you have changed it)
5. Select **Login** to display the **Welcome** screen
6. On the next screen, select **Wireless Setup** to display the **Wireless** screen
7. Complete the following fields:
    - Wireless Network Name (SSID): The name displayed when searching for your wireless network
    - Security Mode: For enhanced security, __WPA-PSK__ is recommended
    - Clear the __Generate Password Automatically__ check box
    - Password: Clear the text box, then type your desired password (8 to 63 characters)

    **Note:** Your password must consist of letters, numbers or a combination of both.
8. Select **Apply**


Change your Wi-Fi network’s name and password – ZyXEL VSG-1432 / SEO

Learn how to change your Wi-Fi network name and password for the ZyXEL VSG-1432 modem.