Reconnecting your Outdoor Camera (V723) to the internet for TELUS Business Customers

Follow the instructions to reconnect your Outdoor Camera (V723) to the internet.

Important
: If you want to modify your camera’s network settings, you can update them via the TELUS Secure Business web portal if the device is still connected to power and is currently connected to an existing internet connection. If your camera is not currently connected to the internet, you will need to follow a different set of instructions. Read below to find out how.

Before you begin, make sure you have your Wi-Fi network’s name and password handy.

Modify your camera’s network settings through web portal

Reconnect your camera to an existing internet connection

If you get a new router or you change your Wi-Fi credentials (i.e. your network name or password) on the existing network, you will need to reconfigure your camera’s settings as explained in this video and the following instructions.

Instructions to reconnect your Outdoor Camera using the Access Point (AP) Mode

To reconnect your Outdoor Camera to the internet using the Access Point (AP) Mode, follow these steps:

Hold down the
Reset
button on the underside of the camera and release when the LED begins to flash white (about five to seven seconds).
Join the
ADC-V723 (XX:XX:XX)
Wi-Fi network from your mobile phone or on your computer.
While connected to the ADC-V723 Wi-Fi network, go to
https://V723install
in your browser and follow the on-screen steps.
Select
Scan
to view a list of Wi-Fi networks.

Select your Wi-Fi network from the list, enter the Wi-Fi password and select
Submit
.
There will be a message indicating the camera is connecting to the Wi-Fi network.
Select
OK
and close your browser tab.
Once your camera’s LED is solid green for a few minutes, try to access
Live Video
on your mobile app or through the web portal to make sure your camera is successfully reconnected to the internet.

Note
: If your camera’s LED does not turn solid green, reboot the camera and try these steps again.

WPS Mode

If your router supports Wi-Fi Protected Setup (WPS) – a wireless network security standard that tries to make connections between a router and wireless devices (cameras) faster and easier – you can also reconnect your Outdoor Camera to the internet using the WPS Mode by following these steps:

Note
: If your router is located far away from your camera, we recommend you recruit a second helper to complete these steps with you.

Find the
WPS button
on your router.
Boost Wi-Fi
Located at the back of the booster
T3200M Gateway
Located at the front of the gateway
Find the
WPS button
located on your Outdoor Camera and hold it for two to three seconds until the LED light on the front of the camera begins to flash blue.
(1)
WPS button
(2)
Removable cover to access WPS button underneath. We recommend using a screwdriver to remove this cover if the exterior button is hard to press.
(3)
LED light on Outdoor Camera
Next, press your router’s
WPS button
for one to six seconds until the light flashes on your router.
Wait a few minutes for the router and camera to connect to each other. The Outdoor Camera’s LED light will flash then turn solid green if successful.

Did this article solve your problem?

Yes

No

Reconnecting your Outdoor Camera (V723) to the internet for TELUS Business Customers

Modify your camera’s network settings through web portal

Reconnect your camera to an existing internet connection

Instructions to reconnect your Outdoor Camera using the Access Point (AP) Mode

WPS Mode

Did this article solve your problem?

Related articles

Reconnecting your TELUS Secure Business Outdoor Camera (V722) to the internet

Follow the instructions to reconnect your TELUS Secure Business Outdoor Camera (V722) to the internet.

Manage your recording rules for TELUS Secure Business cameras

Learn how to navigate and manage your recording rules for your TELUS Secure Business cameras.

Boost Wi-Fi	Located at the back of the booster
T3200M Gateway	Located at the front of the gateway

(1)	WPS button
(2)	Removable cover to access WPS button underneath. We recommend using a screwdriver to remove this cover if the exterior button is hard to press.
(3)	LED light on Outdoor Camera