Connecting the Galaxy Watch to mobile data

Samsung Galaxy Watch Active 2 on Tizen 1.5.0

Link successfully copied to clipboard
Copy link

Activate stand alone service on your watch by connecting the device to mobile data.

  1. Step 1/19

    From a watch face, drag down the Quick settings panel.

    The indicator is towards the top.
  2. Step 2/19

    Tap the Settings icon.

    The indicator is towards the right.
  3. Step 3/19

    Scroll to Connections.

    The indicator is in the center.
  4. Step 4/19

    Tap Connections.

    The indicator is in the center.
  5. Step 5/19

    Scroll to Mobile networks.

    The indicator is in the center.
  6. Step 6/19

    Tap Mobile networks.

    The indicator is in the center.
  7. Step 7/19

    Tap Check mark.

    The indicator is towards the right.
  8. Step 8/19

    Tap Next.

    The indicator is in the bottom right.
  9. Step 9/19

    Tap the Email/Username field.

    The indicator is in the center.
  10. Step 10/19

    Enter your Email or Username.

    The indicator is towards the bottom.
  11. Step 11/19

    Tap Next.

    The indicator is in the bottom right.
  12. Step 12/19

    Enter your password.

    The indicator is towards the bottom.
  13. Step 13/19

    Tap Go.

    The indicator is in the bottom right.
  14. Step 14/19

    Tap Set up this watch.

    The indicator is towards the top.
  15. Step 15/19

    Tap Accept.

    The indicator is in the center.
  16. Step 16/19

    Tap Finish.

    The indicator is in the center.
  17. Step 17/19

    Tap CONNECT.

    The indicator is in the bottom right.
  18. Step 18/19

    Tap NEXT.

    The indicator is in the bottom right.
  19. Step 19/19
    Step 19 of 19:

    You've completed the steps!

    There are no indicators associated with this step.

Was this tutorial helpful?