You're currently in Personal Support. If you're a Business customer, visit our

newNotificationBanner

How to install your TELUS Indoor Camera / Video on how to install your SmartHome+ Indoor Camera 

Before you start, unbox your indoor camera and identify all of the components:
- 1x Indoor camera device with integrated stand
- 1x Wall mount
- 1x 3M tape
- 1x Wall anchor
- 1x Self-tapping screw
- 1x USB-PD AC/DC adaptor
- 1x USB-C cable (1.5 m)
- 1x Quick-start QR code for mobile app (printed on inside lid of box)

You will also need the following:
- A smartphone or tablet
- Wi-Fi coverage with minimum upload speed of 2.5 Mbps at the installation site

Optional (for mounting the camera):
- Screwdriver 
- Drill
- Pencil 
- 6 mm (1/4 inch) drill bit


How to install your TELUS Indoor Camera / Tools and equipment you need

Find a power outlet near the installation site and plug in the camera. Ensure the location you select has the following: 
- Indoor power outlet nearby
- Good Wi-Fi signal strength
- Clear view of the area

<img src="//images.ctfassets.net/9mt4r6ro1ay9/5kDX7dWkbAnnaAVzzGbul5/82159cbf0fca929a9b53f1482d440544/Camera_Installation_Site.png" width="500" height="auto" alt="Two images showing different installation sites: The first picture shows the wrong place to put the camera with no Wi-Fi, no power outlet‌ and a plant on the floor obstructing its line of sight. The second picture shows the correct place to put the camera, which has a clear line of sight, Wi-Fi and a power outlet.">

<p/>

__Mounting the camera (optional)__
There are two ways you can mount the camera to a wall:
- Attach the magnetized ring with the adhesive provided.
- Use the wall anchor and self-tapping screw provided to secure the camera in place.


How to install your TELUS Indoor Camera / Step 1: Find a place to install the camera.

The indoor camera requires a minimum of 2.5 Mbps upload speed to operate. 

On your smartphone, open your browser and go to [telus.com/SpeedTest](https://www.telus.com/en/support/article/speed-test) (Safari on Apple iPhones or Google Chrome on Android phones) to determine the internet speed in the area you’d like your camera installed. 

If you aren’t getting a Wi-Fi signal or your Wi-Fi signal is weak, contact your internet service provider. You might need to upgrade your plan to get more upload bandwidth or to improve your home's Wi-Fi coverage.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/40dgdWveLuqiCjkXtF9IeL/12c83d32d3cf072b4a6db115d49df2f9/Wifi_Signal.png" width="500" height="auto" alt="Three different levels of Wi-Fi signal strength: poor (red), medium (yellow) and maximum (green).">


How to install your TELUS Indoor Camera / Step 2: Check your Wi-Fi speed at the installation site.

1. Connect the power cable to the camera and USB-C power supply.
2. Plug the power supply into the power outlet and wait about 15 seconds for the LEDs to turn solid green.

__Are the LEDs not turning solid green?__
Press and hold the __RESET__ button for 6 seconds until the light cycles to a solid green.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/2luVnPRz1pXrja7XHAZzhz/3c2777d8368605904962977b4f0f9a27/Power_Cable_Setup.png" width="500" height="auto" alt="First image shows an indoor camera that’s already hooked up to a power cable getting connected to the USB-C power supply that goes into the power outlet. Second image shows the flashing LED on the front of the camera turning green after 15 seconds.">

How to install your TELUS Indoor Camera / Step 3: Turn on the camera.

Download the TELUS SmartHome+ app and then log in with your My TELUS credentials.

To download the TELUS SmartHome+ app, scan the QR code on the inside face of the device’s box lid. Or, download them here:

<table><tbody><tr><td style="text-align: center;">[img style="margin-left: auto; margin-right: auto;" src="//images.ctfassets.net/9mt4r6ro1ay9/3O8kA6PhsKMF5lO7nwTByu/35c42e14b2aabf53ccfab13d8fb68719/GooglePlay_English_2x.jpg" alt="Google Play icon" max-width="140" href="https://play.google.com/store/apps/details?id=com.telus.smarthome" target="_blank"]</td><td style="text-align: center;">[img style="margin-left: auto; margin-right: auto;" src="//images.ctfassets.net/9mt4r6ro1ay9/5CTYyLtbuNQVpmfBr7RXPl/68563126a74d75a534ff4d8d59279e35/AppStore_English_2x.jpg" alt="App Store icon" href="https://apps.apple.com/ca/app/smarthome/id6473057948" target="_blank" max-width="140"]</td></tr></tbody></table>

How to install your TELUS Indoor Camera / Step 4: Get the TELUS SmartHome+ app.

1. Log in to the TELUS SmartHome+ app on your mobile device. 
2. In the SmartHome+ app, select the __+__ sign in the top right-hand corner of either the __Home__ tab or __Manage Devices__ tab.
3. Select __Device__ on the bottom sheet that appears.
4. Select __TELUS camera devices__ from the device category list.
5. Scan your device’s QR code. The code can be found on the back of the device’s packaging. 
    - __Note__: Ensure the QR code is in focus, well-lit and that there are no objects between your camera and the code.
6. Select __Device already installed__.
7. Select __Find device__.
8. Grant Bluetooth permission on your mobile device.
9. If prompted, accept the pairing request.
10. Select __Connect to Wi-Fi__.
11. When presented with the option, connect to your desired Wi-Fi network.
12. Enter your Wi-Fi network password if or when prompted.
13. Select __Continue__ once the device connection is successful. 
    - __Note__: This could take a moment.

Nice work. You’re all done.


How to install your TELUS Indoor Camera / Step 5: Add the TELUS Indoor Camera to your account.

1. In the SmartHome+ app, select __View live feed__ of the indoor camera on the __Home__ tab. Or, go to the __Manage Devices__ tab and select the indoor camera. 
2. Select the three dots in the top right-hand corner and select __Device settings__.
3. Select __Recording & notification settings__.
4. Toggle on and off the events that should be recorded and whether you would like to be notified.
5. Select __Save__ in the top right-hand corner to save your changes.

Nice work. You’re all done.


How to install your TELUS Indoor Camera / Step 6: Set up your detection and notification preferences.

1. In the SmartHome+ app, select __View live feed__ of the indoor camera on the __Home__ tab. Or, go to the __Manage Devices__ tab and select the indoor camera. 
2. Select the three dots in the top right-hand corner and select __Device settings__.
3. Select __Device name__.
4. Enter the name you would like to give to your indoor camera.
5. Select __Save__ in the top right-hand corner to save your changes.

Nice work. You’re all done.


How to install your TELUS Indoor Camera / Step 7: Name your camera.

Learn how to identify your camera’s state and the user action required based on LED colour patterns:

<table>
  <tr>
    <th>__LED pattern__</th>
    <th>__Device state message__</th>
    <th>__User action__</th>
  </tr>
  <tr>
    <td>Solid red</td>
    <td>Your camera is booting up.</td>
    <td>Wait a few minutes.<br/><br/>If this continues for more than 5 minutes, reset the device and try again.<br/><br/>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td>
  </tr>
  <tr>
    <td>Blinking red</td>
    <td>Your camera is too cold.</td>
    <td>Wait a few minutes.<br/><br/>If this continues for more than 5 minutes, warm the device to room temperature, reset it and try again.<br/><br/>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app. </td>
  </tr>
  <tr>
    <td>Solid green</td>
    <td>Your camera is ready to connect.</td>
    <td>&#8226; Configure your Wi-Fi credentials.
&#8226; Ensure the Wi-Fi network has internet access.
&#8226; Ensure the Wi-Fi signal is sufficient where the device is placed.</p>
<br>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.
    </td>
  </tr>
  <tr>
    <td>Solid blue</td>
    <td>Your camera is connected to Bluetooth.</td>
    <td>Connect to Wi-Fi and wait a few minutes.<br/><br/>If this continues for more than 5 minutes, do not power cycle the device. Get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app. </td>
  </tr>
  <tr>
    <td>Solid purple</td>
    <td>Your camera is updating.</td>
    <td>Wait a few minutes.<br/><br/>If this continues for more than 5 minutes, do not power cycle the device. Get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td>
  </tr>
  <tr>
    <td>Blinking purple</td>
    <td>Your camera is performing a factory reset.</td>
    <td>Wait a few minutes.<br/><br/>If this continues for more than 5 minutes, reset the device and try again.<br/><br/>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td>
  </tr>
  <tr>
    <td>Solid white</td>
    <td>Your camera is working normally.</td>
    <td>No action required.<br>__Note__: The indoor camera will only show this state for a few minutes and then the LEDs will turn off completely.</td>
  </tr>
  <tr>
    <td>Pulsing white</td>
    <td>Your camera detected an event.</td>
    <td>Please respond to the event.</td>
  </tr>
  <tr>
    <td>Solid yellow</td>
    <td>Your camera is unable to connect to Wi-Fi.</td>
    <td>&#8226; Configure your Wi-Fi credentials.
&#8226; Ensure the Wi-Fi network has internet access.
&#8226; Ensure the Wi-Fi signal is sufficient where the device is placed.
<br>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.
    </td>
  </tr>
  <tr>
    <td>Pulsing yellow</td>
    <td>Your camera is not configured.</td>
    <td>Get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td>
  </tr>
</table>

How to install your TELUS Indoor Camera / LED reference guide

How to install your TELUS Indoor Camera 

The time it takes to install the indoor camera varies depending on where you install it. Standard installations typically take about 15 to 30 minutes to complete.

[notification text="__Note__: Do not attempt to insert an SD card into a HomeView camera. If you've already installed a micro SD card in your camera, unplug the camera and remove the card. If you need further assistance, you can schedule a call with a TELUS representative from the SmartHome+ app."]

How to install your TELUS Indoor Camera / SEO

Step-by-step installation guide that walks you through how to set up your indoor camera.

How to install your TELUS Indoor Camera | TELUS Support

This step-by-step installation guide will walk you through how to set up your indoor camera.

Video camera installation guides / Installing your TELUS HomeView Indoor Camera / Interstitial Card

Front-side view of TELUS HomeView Indoor Camera

TELUS HomeView Indoor Camera

How to install your TELUS Outdoor Camera / How to install your SmartHome+ Outdoor Camera: Video

How to install your TELUS Outdoor Camera / Get the TELUS SmartHome+ app.

Before you start, unbox your TELUS Outdoor Camera and identify all of the components:
- 1x Outdoor camera
- 1x Wall mount
- 2x Self-tapping screws
- 2x Wall anchors
- 1x USB-PD AC/DC adapter
- 1x USB-C cable (3 m)
- 1x Adhesive gasket
- 1x Quick-start QR code for mobile app (printed on inside lid of box)

You will also need the following:
- A smartphone or tablet with the TELUS SmartHome+ app installed and internet access
- Wi-Fi coverage with minimum upload speed of 2.5 Mbps at the installation site
- Pencil
- Screwdriver
- Drill
- 6 mm (¼ inch) drill bit

Optional:
- Ladder
- Caulking and caulking gun


How to install your TELUS Outdoor Camera / Tools and equipment you need

To begin setup, plug your camera in at home before taking it outside:
1. Connect the power cable to the camera and USB-C power supply.
2. Plug the power supply into the power outlet and wait about 15 seconds for the LED to turn solid green.

__Are the LEDs not turning solid green__?
Press and hold the __RESET__ button for 5 seconds until the light cycles to a solid green.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/2kiGotMyiNkUZVtfVi0dma/354e8815528fcd16d839a49e3247128f/Power_Cable_Setup_Outdoor.png" width="500" height="auto" alt="First image shows an outdoor camera that’s already hooked up to a power cable getting connected to the USB-C power supply that goes into the power outlet. Second image shows the flashing LED on the front of the camera turning green after 15 seconds.">

How to install your TELUS Outdoor Camera / Step 1: Turn on the camera in your home.

1. Log in to the TELUS SmartHome+ app on your mobile device. 
2. In the SmartHome+ app, select the __+__ sign in the top right-hand corner of either the __Home__ tab or __Manage Devices__ tab.
3. Select __Device__ on the bottom sheet that appears.
4. Select __TELUS camera devices__ from the device category list.
5. Scan your device’s QR code. The code can be found on the back of the device’s packaging. 
    - __Note__: Ensure the QR code is in focus, well-lit and that there are no objects between your camera and the code.
6. Select __Device already installed__.
7. Select __Find device__.
8. Grant Bluetooth permission on your mobile device.
9. If prompted, accept the pairing request.
10. Select __Connect to Wi-Fi__.
11. When presented with the option, connect to your desired Wi-Fi network.
12. Enter your Wi-Fi network password if or when prompted.
13. Select __Continue__ once the device connection is successful. 
    - __Note__: This could take a moment.

Nice work. You’re all done.

How to install your TELUS Outdoor Camera / Step 2: Add the TELUS Outdoor Camera to your account.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/2Mh2j7F6be45hXUkpbXcLa/682f4bf54d8f45bd1b4546931084c8eb/Home_Aerial_View_v1.jpg" width="450" height="auto" alt="Aerial view of a home with four outdoor cameras installed on the north, east, south and west sides of the house.">

The TELUS Outdoor Camera requires a minimum upload speed of 2.5 Mbps to operate.

Open your web browser and go to [telus.com/SpeedTest](http://telus.com/SpeedTest) to determine the internet speed at the installation site. Ensure the phone or device running the test is connected to your home’s Wi-Fi network and is positioned where the camera will be installed.

If you aren’t getting a Wi-Fi signal or your Wi-Fi signal is weak, contact your internet service provider. You might need to upgrade your plan to get more upload bandwidth or to improve your home's Wi-Fi coverage.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/40dgdWveLuqiCjkXtF9IeL/12c83d32d3cf072b4a6db115d49df2f9/Wifi_Signal.png" width="500" height="auto" alt="Three different levels of Wi-Fi signal strength: poor (red), medium (yellow) and maximum (green).">

How to install your TELUS Outdoor Camera / Step 3: Find a place to install the camera.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/017Rk5GhnfKdDrWiCtNKME/6c7cb84bbd7e1a8a830f4d4f75248a79/outdoor_indoor_outlet_v2.png" width=300 alt="Picture distinguishing between an indoor outlet versus an outdoor outlet with an enclosure.">

If using an outdoor outlet, you must have an enclosure.

__Note__: Do not use an outlet that is controlled by a switch or timer.

__Tip__: If you want to use custom wiring for powering your outdoor cameras, you can order a USB-C breakout cable from a retailer, such as [Amazon](https://www.amazon.ca/gp/product/B094VJV6F8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1).

How to install your TELUS Outdoor Camera / Step 4: Find a power outlet near the installation site. 

<img src="//images.ctfassets.net/9mt4r6ro1ay9/7FED6Vq1bCdZ58rlOV2Alx/b8111a02f27821831889da70236caba2/Power_Cable_Setup_v2.png" width="400" height="auto" alt="Outdoor camera that’s already hooked up to a power cable getting connected to the USB-C power supply that goes into the power outlet.">

1. Connect the power cable to the camera and USB-C power supply.
2. Plug the power supply into the power outlet and wait about 15 seconds for the LED to turn solid green.

How to install your TELUS Outdoor Camera / Step 5: Plug in your camera outside.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/5BmFh4ESIXRMZgvDOPSXxY/c3ddd4722e7e8e01c98811e7c9a93b35/outdoor_camera_cable-route_v2.png" width="350" height="auto" alt="Three options of where to run your cable: through a corner opening of a door/garage/window, along siding or through a drilled hole in the wall.">
<p>
Here are your options for where to run your cable:
- Through the corner opening of a door, garage or window to an indoor power outlet
- Along siding to an outdoor power outlet with a weatherproof enclosure
- Through a drilled hole in the wall (use a 13 mm or ½ inch drill bit) 
  - __Tip__: Use caulk to seal around the drilled hole.

How to install your TELUS Outdoor Camera / Step 6: Plan the cable route to the power outlet.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/76CAp9tA67zQK2PljyYLSD/32d0f6222cd7183a7d68e534efe53026/outdoor_camera_height.jpg" width="400" height="auto" alt="Outdoor camera mounted on the exterior of a home about 2.5 to 4.5 metres above ground.">

1. Place the camera 2.5 to 4.5 metres (8 to 15 feet) above the ground.
2. Tilt the camera downward 30 to 60 degrees‌ — ‌enough to see people’s faces.
3. Make sure the camera has a clear view and the horizon is level.

__Tip__: Return to the TELUS SmartHome+ app and view the live feed to help adjust the camera to the desired position.

__Don’t have a clear view__?
If you’re unable to achieve a clear view at your desired spot, consider finding a different location to mount your camera.


How to install your TELUS Outdoor Camera / Step 7: Determine the camera position.

Place the wall mount and use a pencil to mark the screw location.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/36ftkGCPYEdmyfTFxLNwjF/67f8206a170222494dd3cb305de9a491/wall_mount_location_v2.png" width="370" height="auto" alt="Image showing a wall mount not levelled properly versus a wall mount correctly levelled and a person marking the screw locations through the mount’s two holes.">

How to install your TELUS Outdoor Camera / Step 8: Mark the wall mount location.

Determine the kind of material you are attaching the camera to:

__Siding__:
- Wood
- Vinyl
- Aluminum
<img src="//images.ctfassets.net/9mt4r6ro1ay9/1sq305woOPdWTEgsdFR1TG/37add436fb5d37829341efe435e59c6c/Siding_Materials.jpg" width="400" height="auto" alt="Three different siding materials: wood, vinyl and aluminum.">

__Masonry__:
- Stucco
- Brick
- Stone
<img src="//images.ctfassets.net/9mt4r6ro1ay9/J0y8fEioiESa4AsA142SW/c28e5f3cc3c2c473c0392826bd682939/Masonry_Materials.jpg" width="400" height="auto" alt="Three different masonry materials: stucco, brick and stone.">

How to install your TELUS Outdoor Camera / Step 9: Identify the mounting surface.

To install the wall anchors, you’ll need a masonry drill bit, drill‌ and hammer (optional).

1. Using a 6 mm (¼ inch) masonry drill bit, drill two pilot holes for the wall anchors.
2. Push or hammer the wall anchors into the pilot holes.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/2Yejm2FvuoVJgyiACQmrYw/cb2bdd2b8b3c7fcbb6327cd6c3036108/Drill_Masonry.jpg" width="350" height="auto" alt="Top image shows two holes being drilled into the wall using a masonry drill bit. Bottom image shows wall anchors getting inserted and hammered into the holes.">

How to install your TELUS Outdoor Camera / Step 10: Install the wall anchors.

To attach the wall mount, you’ll need a screwdriver and the outdoor camera.

Place the camera on the wall mount, ensuring the power cable is placed in the groove.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/4eX2koIEmG8IlEl7pJDacb/ff0510ed77945a81654525a061d8e32e/Attach_Wall_Mount.jpg" width="280" height="auto" alt="Wall mount being placed overtop of the two drilled holes and a screwdriver being used to insert the two screws into the drilled holes.">

How to install your TELUS Outdoor Camera / Step 11: Attach the wall mount.

Use staples, cable tracks or cable fasteners (not included) to secure the power cable.

__Note__: These items are not supplied in the kit.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/aksqRzC9RaHxCr4WF6t9j/971aad692e23e1a3a88231638d1b13b9/Secure_Cable.jpg" width="380" height="auto" alt="A power cable connected to an outdoor camera mounted above a garage door and the three options for securing the cable: staples, cable tracks and cable fasteners.">

How to install your TELUS Outdoor Camera / Step 12: Secure the cable route.

1. In the SmartHome+ app, select __View live feed__ of the outdoor camera on the __Home__ tab. Or, go to the __Manage Devices__ tab and select the outdoor camera. 
2. Select the three dots in the top right-hand corner and select __Device settings__.
3. Select __Recording & notification settings__.
4. Toggle on and off the events that should be recorded and whether you would like to be notified.
5. Select __Save__ in the top right-hand corner to save your changes.

Nice work. You’re all done.


How to install your TELUS Outdoor Camera / Step 13: Set up your detection and notification preferences.

1. In the SmartHome+ app, select __View live feed__ of the outdoor camera on the __Home__ tab. Or, go to the __Manage Devices__ tab and select the outdoor camera. 
2. Select the three dots in the top right-hand corner and select __Device settings__.
3. Select __Device name__.
4. Enter the name you would like to give to your outdoor camera.
5. Select __Save__ in the top right-hand corner to save your changes.

Nice work. You’re all done.


How to install your TELUS Outdoor Camera / Step 14: Name your camera. 

__Will my outdoor camera work outside all year round__?

To guarantee year-round operation, the outdoor camera has been designed to be weather-resistant and to operate in temperatures ranging from -40 to 50°C (-40 to 122°F). It also has an IP65 rating. 


How to install your TELUS Outdoor Camera / Frequently asked questions (FAQ) 

Learn how to identify your camera’s state and the user action required based on LED colour patterns:

<table>
  <tr>
    <td>__LED pattern__</td>
    <td>__Device state message__</td>
    <td>__User action__</td>
  </tr>
  <tr>
    <td>Solid red</td>
    <td>Your camera is booting up.</td>
    <td>Wait a few minutes.<br/><br/>If this continues for more than 5 minutes, reset the device and try again.<br/><br/>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td>
  </tr>
  <tr>
    <td>Blinking red</td>
    <td>Your camera is too cold.</td>
    <td>Wait a few minutes.<br/><br/>If this continues for more than 5 minutes, warm the device to room temperature, reset it and try again.<br/><br/>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app. </td>
  </tr>
  <tr>
    <td>Solid green</td>
    <td>Your camera is ready to connect.</td>
    <td>&#8226; Configure your Wi-Fi credentials.
&#8226; Ensure the Wi-Fi network has internet access.
&#8226; Ensure the Wi-Fi signal is sufficient where the device is placed.</p>
<br>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.
    </td>
  </tr>
  <tr>
    <td>Solid blue</td>
    <td>Your camera is connected to Bluetooth.</td>
    <td>Connect to Wi-Fi and wait a few minutes.<br/><br/>If this continues for more than 5 minutes, do not power cycle the device. Get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app. </td>
  </tr>
  <tr>
    <td>Solid purple</td>
    <td>Your camera is updating.</td>
    <td>Wait a few minutes.<br/><br/>If this continues for more than 5 minutes, do not power cycle the device. Get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td>
  </tr>
  <tr>
    <td>Blinking purple</td>
    <td>Your camera is performing a factory reset.</td>
    <td>Wait a few minutes.<br/><br/>If this continues for more than 5 minutes, reset the device and try again.<br/><br/>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td>
  </tr>
  <tr>
    <td>Solid white</td>
    <td>Your camera is working normally.</td>
    <td>No action required.</td>
  </tr>
  <tr>
    <td>Pulsing white</td>
    <td>Your camera detected an event.</td>
    <td>Please respond to the event.</td>
  </tr>
  <tr>
    <td>Solid yellow</td>
    <td>Your camera is unable to connect to Wi-Fi.</td>
    <td>&#8226; Configure your Wi-Fi credentials.
&#8226; Ensure the Wi-Fi network has internet access.
&#8226; Ensure the Wi-Fi signal is sufficient where the device is placed.
<br>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.
    </td>
  </tr>
  <tr>
    <td>Pulsing yellow</td>
    <td>Your camera is not configured.</td>
    <td>Get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td>
  </tr>
</table>

How to install your TELUS Outdoor Camera / LED reference guide

How to install your TELUS Outdoor Camera

The time it takes to install the outdoor camera varies depending on where you install it. Standard installations typically take about 30 to 60 minutes to complete.

[notification text="__Note__: Do not attempt to insert an SD card into a HomeView camera. If you've already installed a micro SD card in your camera, unplug the camera and remove the card. If you need further assistance, you can schedule a call with a TELUS representative from the SmartHome+ app."]

How to install your TELUS Outdoor Camera  / SEO

Step-by-step installation guide that walks you through how to set up your outdoor camera.

How to install your TELUS Outdoor Camera  | TELUS Support

This step-by-step installation guide will walk you through how to set up your outdoor camera.

Video camera installation guides / Installing your TELUS HomeView Outdoor Camera / Interstitial Card

Side view of TELUS HomeView Outdoor Camera

TELUS HomeView Outdoor Camera

How to install your TELUS Doorbell Camera / Video on how to install your TELUS Doorbell Camera

The TELUS Doorbell Camera is designed to work with all standard wired doorbell chimes. Here’s how to identify if you have one of these:
1. Push your existing doorbell to confirm you hear a chime noise from inside the house.
2. Locate the source of the noise. 

Standard doorbell chimes are typically installed high on the wall in a central location. They will have a removable cover which reveals three screw terminals marked __Rear__, __Trans__‌ or __Common__ and __Front__. Voltage in the range of 8-24v AC will be available across __Trans__ and __Front__, as well as __Trans__ and __Rear__.

__Note__: The TELUS Doorbell Camera is only compatible with 10-24v AC 10VA.

The doorbell camera has been tested with the following standard mechanical chimes: 
- Heath Zenith SL-2796-03 
- Heath Zenith SL-2735-02 
- Honeywell RCW110KB1008

The doorbell camera has been specifically tested with the following standard digital chimes: 
- Hampton Bay CH-7612-03 
- Heath Zenith SL-7582

__Will the doorbell camera work with my existing wiring__?

The TELUS Doorbell Camera is designed to work with all 10-24v AC 10VA standard doorbell wiring. 
- If you currently have a wired doorbell, the doorbell camera will likely be a simple replacement.
- If your home doesn’t have standard doorbell and chime wiring, you may need to call a qualified electrician.


How to install your TELUS Doorbell Camera | Check doorbell compatibility

Before you start, unbox your doorbell camera and identify all of the components:
- 1x Doorbell camera 
    - Pre-assembled to 1x wall mount
- 1x Unlocking pin 
    - Used to detach the wall mount from the doorbell camera. 
- 4x Self-tapping screws: 2x short and 2x long
- 2x Wall anchors
- 1x Wedge kit
- 1x Chime adapter
- 1x Digital chime adapter 5-wire harness
- 1x Mechanical chime adapter 2-wire harness
- 1x Adhesive circle for chime adapter
- 1x Adhesive gasket
- 2x Doorbell wire extensions
- 1x 2-way wire connector for doorbell wire extender
- 1x 3-way wire connector for digital chime adapter
- 1x Quick-start QR code for mobile app (printed on inside lid of box)
- 1x Certification insert

__You will also need the following__:
- Smartphone or tablet with the TELUS SmartHome+ app installed and internet access
- Cross-head (Phillips) screwdriver
- Pencil
- Wi-Fi coverage with minimum upload speed of 2.5 Mbps at the installation site
- Low-voltage AC power (10–24 VAC, 10 VA) in the place you want to install your doorbell
- A wired doorbell chime in your home
- Drill with 6 mm bit for wall mounting


How to install your TELUS Doorbell Camera | Tools and equipment you need

Make sure your existing doorbell is in working order: 
- Press your doorbell and listen for your doorbell chime to ring.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/sOPZoDP1XwooXNpBuHloC/9f4d7c422eef5fbf8ea66c4679577727/DoorBell.png" width="500" height="auto" alt="Doorbell being pushed, triggering the chime to ring">
<p>
__Didn’t ring__?
- If the existing doorbell does not ring the indoor chime when the button is pressed, there may be a power issue. Consult an electrician before beginning the installation process.

How to install your TELUS Doorbell Camera | Step 1: Check your doorbell.

The TELUS Doorbell Camera requires a minimum Wi-Fi signal of 2.5 Mbps upload speed to operate. 

- Visit [telus.com/SpeedTest](https://telus.com/SpeedTest) to determine your internet speed. Ensure the phone or device running the test is connected to your home’s Wi-Fi network and is positioned where the doorbell will be installed.
- If you aren’t getting a Wi-Fi signal or your Wi-Fi signal is weak, contact your internet service provider. You might need to upgrade your plan to get more upload bandwidth or to improve your home's Wi-Fi coverage.
<p>
<img src="//images.ctfassets.net/9mt4r6ro1ay9/40dgdWveLuqiCjkXtF9IeL/12c83d32d3cf072b4a6db115d49df2f9/Wifi_Signal.png" width="500" height="auto" alt="Three different levels of Wi-Fi signal strength: poor (red), medium (yellow) and maximum (green).">

How to install your TELUS Doorbell Camera  | Step 2: Test Wi-Fi requirement.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/7Kbumdgj9xN7XNi7zyegkG/c2d33e3a4a670bf9982116e90297c783/Turn_off_breaker.png" width="512" height="auto" alt="Image of one of the breaker switches flipped to off.">
<p>
- Before you start the installation, turn off the breaker that controls your doorbell circuit.

How to install your TELUS Doorbell Camera | Step 3: Turn off the breaker.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/7FwDvEpqMJQvNaJ1ZK4QAc/fa5acc9e5ec656cf3d0939e10c041c7c/Test_Doorbell_Chime_-_Off.png" width="500" height="auto" alt="Doorbell being pushed but not triggering the chime.">
<p>
- Test your existing doorbell to make sure the power is off and it does not ring.

How to install your TELUS Doorbell Camera | Step 4: Test doorbell chime.

You can identify whether the chime is mechanical or digital by looking inside the chime box. If your chime box is neither of the options below or if you have an intercom system, then it is incompatible with the doorbell camera.

__Mechanical Chime__: This type of chime includes a metal bar and striker pin. It makes a “ding dong” sound when the doorbell is pressed.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/40Bv1nBw3HzLFoAi0N28xW/2edebb4246d3c60713cf165db69feba7/Mechanical_chime.png" width="500" height="auto" alt="Image of mechanical chime with cover removed that produces a “ding dong” sound">

__Digital Chime__: This type of chime includes a speaker. It plays a melody when the doorbell is pressed.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/7E63vbEQKPU3Esc62cg0Ko/e829ab98327231a4629ae7ae9d78e455/Digital_chime.png" width="512" height="auto" alt="Image of digital chime with cover removed that produces a melody.">

How to install your TELUS Doorbell Camera | Step 5: Identify chime type.

### Digital chime

To wire your digital chime, follow the steps below:
1. Insert the supplied 5-wire harness into the chime adapter.
2. Remove the cover from your chime.
3. Loosen the screws on the chime terminals labelled __Transformer__ and remove the wire from the chime terminal.
4. Connect the digital wire harness wire labelled __Trans__ to the chime terminal labelled __Transformer__ by inserting the spade under the screw and tightening it.
5. Connect the digital wire harness wire labelled __T2__ to the loose wire removed from the chime terminal labelled __Transformer__ using a wire nut (or push fitting).
6. Remove the wire from the chime terminal labelled __Front__ by loosening screws and removing the wire.
7. Connect the digital wire harness wire labelled __Front__ to the chime terminal labelled __Front__ by inserting the spade under the screw and tightening it.
8. Connect the digital wire harness wire labelled __F2__ to the loose wire removed from the chime terminal labelled __Front__ using a wire nut (or push fitting).
9. Locate an existing multi-wire connector, likely a wire nut, and add the digital wire harness wire labelled __T3__ to this bundle by unscrewing the wire nut, inserting the wire into the bundle and replacing the wire nut.
10. Using the supplied double-sided circle adhesive, mount the adaptor to the front of the chime.
11. Replace the cover on your chime.

<style>
table, th, td {
  border: 1px solid white;
  border-collapse: collapse;
}
th, td {
  background-color: transparent;
}
</style>
<table type="white">
  <tr>
  </tr>
  <tr>
    <td>__Before wiring__:</td>
    <td>__After wiring__:</td>
  </tr>
  <tr>
    <td><img src="//images.ctfassets.net/9mt4r6ro1ay9/52ztxSqsXMef8tp2Ep0lTh/3d3dcf9404cf784f059af09e5f3965bd/Digital_chime_box_BEFORE.png" width="500" height="auto" alt="Digital chime without adapter mounted, showing rear, transformer and front terminals."></td>
    <td><img src="//images.ctfassets.net/9mt4r6ro1ay9/tF5bUs2biBix8JHKlQu5Z/c07843c63c88517b88957745630c1468/Digital_chime_after_adaptor.png" width="500" height="auto" alt="Digital chime with the adaptor mounted to front of chime, showing rear, transformer and front terminals."></td>
  </tr>
</table>

### Mechanical chime
To wire your mechanical chime, follow the steps below:
1. Insert the supplied two-wire harness into the chime adapter.
2. Remove the cover from your chime.
3. Loosen the screws on the chime terminals labelled __Front__ and __Transformer__. Do not remove the existing wires.
4. Connect the mechanical wire harness wire labelled __Trans__ to chime terminal labelled __Transformer__ by inserting the spade under the screw and tightening it.
5. Connect the mechanical wire harness wire labelled __Front__ to the chime terminal labelled __Front__ by inserting the spade under the screw and tightening it.
6. Using the supplied double-sided circle adhesive, mount the adapter to the front of the chime.
7. Replace the cover on your chime.

<style>
table, th, td {
  border: 1px solid white;
  border-collapse: collapse;
}
th, td {
  background-color: transparent;
}
</style>
<table type="white">
  <tr>
  </tr>
  <tr>
    <td>__Before wiring__:</td>
    <td>__After wiring__:</td>
  </tr>
  <tr>
    <td><img src="//images.ctfassets.net/9mt4r6ro1ay9/5rX4Xq46RVA7lkUcvLIilU/2bf56d23e6d07a5d69ee61ef91762fcc/Mechanical_chime_before_adaptor.png" width="500" height="auto" alt="Mechanical chime showing rear, transformer and front terminals without chime adapter mounted."></td>
    <td><img src="//images.ctfassets.net/9mt4r6ro1ay9/4hdm83XYZTiyqVQirJtlyM/62ff71c19a51ed53b87d9b1efe0f42aa/Mechanical_chime_after_adaptor.png" width="500" height="auto" alt="Mechanical chime showing rear, transformer and front terminals with chime adapter mounted to front of the chime."></td>
  </tr>
</table>

How to install your TELUS Doorbell Camera | Step 6: Wiring your chime.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/26U8aLszzPMR53XldMEwe3/8935104b4a1f3a2902dcc93bdda03448/Remove_screws.png" width="500" height="auto" alt="Three images showing the steps of removing existing doorbell screws, checking for two wires attached to doorbell and bending the doorbell wires.">

1. Remove the existing doorbell screws securing your doorbell to the wall.
2. Check to see if there are two wires attached to the doorbell. 
    - __Note__: If the existing doorbell does not have wires, then you will need to call an electrician.
3. Remove the wires from the existing doorbell: Bend the doorbell wires so they don’t slip back into the wall. Use the optional extension wires if the doorbell’s wires are too short.

How to install your TELUS Doorbell Camera | Step 7: Remove old doorbell.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/450h7z6RQj0Fc2Xn2VZECO/bc4aeef57a6eb34095ccf025f9d75860/1P-DIY-DoorBellCamera-CameraWedge.png" width="500" height="auto" alt="Doorbell camera with a 15° wedge installed underneath it.">
<p>
- Determine if the position of your doorbell would benefit from the optional 15° wedge that is included in your package. This could provide better visibility of approaching visitors and the surrounding area.

How to install your TELUS Doorbell Camera | Step 8: Determine if a camera wedge is required.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/1vyvGMJXJG0OoeX9JRR3eO/71fbf1757affb751625c21d7106c306d/detach_doorbell_backplate.jpg" width="500" height="auto" alt="Image showing pin inserted into small hole at bottom of doorbell camera using the pin to remove the wall mount from the camera.">
<p>
To separate the wall mount from the doorbell camera, use the unlocking pin (included in the package): 
- Insert the pin’s tip into the small hole at the bottom of the doorbell and push to detach the mount.


How to install your TELUS Doorbell Camera | Step 9: Detach wall mount from doorbell.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/7692HTtOOhQPtMQ7X6ZxWb/74eed98199393679443b97839e36e41e/Pull_wires_through.png" width="500" height="auto" alt="Two wires passing through the large central hole of the doorbell baseplate.">
<p>
If the doorbell baseplate is still attached to the doorbell, use the unlocking pin to separate them: 
1. Insert the pin into the small hole at the bottom of the doorbell. 
2. Hold the doorbell baseplate or wedge up to the desired mounting location on the wall, passing the existing doorbell wires through the large central hole.

How to install your TELUS Doorbell Camera | Step 10: Pull the wires through.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/3mD8fC0Q9NmjrHPNFkOv6B/3cfb131c8159b1ad7def04817e491ad1/Mark_screw_placement.png" width="500" height="auto" alt="Image showing incorrect and correct way of leveling the wall mount and marking the screw placement in the two screw holes on the wall mount.">
<p>
1. Ensure the wall mount is straight and level on the wall.
2. Using the two screw holes on the wall mount as a template, mark the screw placement. 
3. If possible, reuse one or both of the existing doorbell screw holes.
  - If none of the existing holes are reused, remember to fill those holes with a sealant.

How to install your TELUS Doorbell Camera | Step 11: Mark the screw placement on mounting surface.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/JOchbhQ0lwulq0VPfE7DG/314b4e5dbe992ab7a1ec0b881995f582/Masonry_install.png" width="500" height="auto" alt="Masonry drill bit drilling pilot holes for the wall anchors."><p>
1. Using a 6 mm (1/4 inch) masonry drill bit, drill pilot holes for the wall anchors.
    <img src="//images.ctfassets.net/9mt4r6ro1ay9/2q7pvbapeoDG4JRiD13A41/4b511eaae64c782902e62c1c7b193620/Masonry_install2.png" width="512" height="auto"><p>
2. Push or hammer the wall anchors into the pilot holes.

How to install your TELUS Doorbell Camera | Step 12: Install the wall anchors.

1. If the wedge is being used, screw the wedge into the wall and then screw the baseplate into the wedge. 
2. If the wedge is not being used, screw the baseplate into the wall.
    <img src="//images.ctfassets.net/9mt4r6ro1ay9/4vYxd6llUfDrEIQ7MfsXNh/5b864f2378f2d60b7706a9b9fdac76c9/Siding_install.png" width="500" alt="Two doorbell wires being pulled through the central hole of the mounting bracket and bracket being aligned with the marked locations for the screws."><p>
3. Pull the doorbell wires through the hole in the mounting bracket.
    <img src="//images.ctfassets.net/9mt4r6ro1ay9/ZKOiTkRmtoxNC6rpXh6tQ/042a5c079558008aac4931145c8ad6d7/Siding_install2.png" width="500"><p>
4. Place the mounting bracket over the marked location for the screws.
5. Screw the mounting bracket into the siding or wall.


How to install your TELUS Doorbell Camera | Step 13: Attach the wall mount.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/5Fm4F7ylEHWdzBJgUSQGzK/aedac94dd800277fc414c76b7ddf63cd/Power_wires.png" width="500" alt="Screwdriver loosening terminal screws on doorbell."><p>
1. Loosen the two terminal screws on the doorbell.
    <img src="//images.ctfassets.net/9mt4r6ro1ay9/5QMzvhH4DowpbGz0fseTDO/1a0c4aca0c424fa21b0f5b87de49c96a/Power_wires2.png" width="500" alt="Wires being wrapped around the terminal screws."><p>
2. Attach the wires to the terminal screws. It doesn’t matter which terminal you connect a wire to.
3. The optional extension wires can be used if the doorbell’s wires are too short.
    <img src="//images.ctfassets.net/9mt4r6ro1ay9/13MbV4RhqhCOWfD5hEUlHh/aaac948ce0eda579495d7af0c55fe362/Power_wires3.png" width="500" alt="Screwdriver tightening the terminal screws with wires wrapped around the terminal screws."><p>
4. Tighten the terminal screws and tuck away any excess wire.


How to install your TELUS Doorbell Camera | Step 14: Connect the power wires.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/2NtdSZTsMgO956w7DKh3kp/2d67724e81c3eddcb04fbb43e75bda4b/Attach_doorbell_camera.png" width="500" height="auto" alt="Two images showing doorbell being aligned to mounting bracket and then snapped into place.">
<p>
1. Align the tabs on the top of the doorbell camera with the notches of the mounting bracket.
2. Press the bottom face of the doorbell camera until it's flush with the mounting bracket and you hear a click.
3. If you need to remove the camera at any time, use the unlocking pin provided to separate the camera from the bottom.

How to install your TELUS Doorbell Camera | Step 15: Attach the doorbell.

<img src="//images.ctfassets.net/9mt4r6ro1ay9/7ze9cjRLSTufeiUvpmFA4S/cf4737afaaff79767496974a2a5b3398/Turn_on_breaker.png" width="500" height="auto" alt="Breaker switch being turned back on.">
<p>
- Restore power by turning on the breaker that controls your doorbell circuit.

How to install your TELUS Doorbell Camera | Step 16: Turn on the breaker.

- Download the TELUS SmartHome+ app and then log in with your My TELUS credentials.

To download the TELUS SmartHome+ app, scan the QR code on the inside face of the device’s box lid. Or, download them here:

<style>
table, th, td {
  border: 1px solid white;
  border-collapse: collapse;
}
th, td {
  background-color: transparent;
}
</style>
<table type="white"><tr><td style="text-align: center;">[img style="margin-left: auto; margin-right: auto;" src="//images.ctfassets.net/9mt4r6ro1ay9/7A7K4NAtZSYQkUgOsSeAii/e25d07b3dc7d2c809d251f3182376ae1/640px-Available_on_the_App_Store__black_.png" alt="App Store icon" href="https://apps.apple.com/ca/app/smarthome/id6473057948" target="_blank" max-width="140"]</td><td style="text-align: center;">[img style="margin-left: auto; margin-right: auto;" src="//images.ctfassets.net/9mt4r6ro1ay9/3O8kA6PhsKMF5lO7nwTByu/35c42e14b2aabf53ccfab13d8fb68719/GooglePlay_English_2x.jpg" alt="Google Play icon" max-width="140" href="https://play.google.com/store/apps/details?id=com.telus.smarthome" target="_blank"]</td></tr></table>

How to install your TELUS Doorbell Camera | Step 17: Get the TELUS SmartHome+ app.

1. Log in to the TELUS SmartHome+ app on your mobile device. 
2. In the SmartHome+ app, select the __+__ sign in the top right-hand corner of either your __Home__ tab or __Devices__ tab.
3. Select __Device__ on the bottom sheet that appears.
4. Select __TELUS camera devices__ from the device category list.
5. Scan your device’s QR code: The code can be found on the back of the device’s packaging and on the included chime adapter. Ensure the QR code is in focus, well-lit and that there are no objects between your camera and the code.
6. Select __Device already installed__.
7. Select __Find device__.
8. Grant Bluetooth permission on your mobile device.
9. If prompted, accept the pairing request.
    - If the SmartHome+ app is unable to find the camera, move your mobile device so that it's directly touching the camera and retry.
10. Select __Connect to Wi-Fi__.
11. When presented with the option, connect to your desired Wi-Fi network.
12. Enter your Wi-Fi network password if or when prompted.
13. Select __Continue__ once the device connection is successful. 
    - __Note__: This could take a moment.

Nice work. You’re all done.


How to install your TELUS Doorbell Camera | Step 18: Add the doorbell camera to your account.

1. In the SmartHome+ app, select __View live feed__ of the indoor camera on the __Home__ tab. Or, go to the __Manage Devices__ tab and select the indoor camera. 
2. Select the three dots in the top right-hand corner and select __Device settings__.
3. Select __Recording & notification settings__.
4. Toggle on and off the events that should be recorded and whether you would like to be notified.
5. Select __Save__ in the top right-hand corner to save your changes.

Nice work. You’re all done.

How to install your TELUS Doorbell Camera | Step 19: Set up detection and notification preferences.

How to install your TELUS Doorbell Camera | Step 20: Name your device.

If you run into the issues below during setup, try the following steps to troubleshoot:

### Can’t connect the camera to Bluetooth: 

1. Move your mobile device so that it's directly touching the camera.
2. Resume the setup in the SmartHome+ app.

__For iOS devices only:__

1. Exit out of the SmartHome+ app and go to your phone’s Bluetooth settings.
2. Look for anything that starts with __idc__, __odc__ and/or __db__, tap the info icon and then tap Forget this device.
3. Resume set up in the SmartHome+ app.

### Can’t connect the camera to Wi-Fi:

1. Move your camera closer to your Wi-Fi access point (e.g. modem or booster).
    - On your smartphone, open your browser (Safari on Apple iPhones or Google Chrome on Android phones) and visit [telus.com/SpeedTest](https://www.telus.com/en/support/article/speed-test) to determine the internet speed in the area you’ve placed your camera.
    - __Note__: The TELUS Cameras need a minimum upload speed of 2.5 Mbps to work.
2. If you aren’t getting a Wi-Fi signal or your Wi-Fi signal is weak, contact your internet service provider. You might need to upgrade your plan to get more upload bandwidth or to improve your home's Wi-Fi coverage.


How to install your TELUS Doorbell Camera / I’m experiencing issues setting up my camera. 

__Will my doorbell camera work outside all year round__?
To guarantee year-round operation, the TELUS Doorbell Camera has been designed to be weather-resistant and to operate in temperatures ranging from -40 to 50°C (-40 to 122°F). It also has an IP65 rating. 


How to install your TELUS Doorbell Camera | Frequently asked questions (FAQ) 

<table><tr><th>__LED pattern__</th><th>__Device state message__</th><th>__User action__</th></tr><tr><td>Solid red</td><td>Your camera is booting up.</td><td>Wait a few minutes.<br/><br/>If this continues for more than five minutes, reset the device and try again.<br/><br/>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td></tr><tr><td>Blinking red</td><td>Your camera is too cold.</td><td>Wait a few minutes.<br/><br/>If this continues for more than five minutes, warm the device to room temperature, reset it and try again.<br/><br/>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td></tr><tr><td>Solid green</td><td>Your camera is ready to connect.</td><td>&#8226; Configure your Wi-Fi credentials.
&#8226; Ensure the Wi-Fi network has internet access.
&#8226; Ensure the Wi-Fi signal is sufficient where the device is placed.</p><br>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td></tr><tr><td>Solid blue</td><td>Your camera is connected to Bluetooth.</td><td>Connect to Wi-Fi and wait a few minutes.<br/><br/>If this continues for more than five minutes, do not power cycle the device. Get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td></tr><tr><td>Solid purple</td><td>Your camera is updating.</td><td>Wait a few minutes.<br/><br/>If this continues for more than five minutes, do not power cycle the device. Get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td></tr><tr><td>Blinking purple</td><td>Your camera is performing a factory reset.</td><td>Wait a few minutes.<br/><br/>If this continues for more than five minutes, reset the device and try again.<br/><br/>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td></tr><tr><td>Solid white</td><td>Your camera is working normally.</td><td>No action required.</td></tr><tr><td>Pulsing white</td><td>Your camera detected an event.</td><td>Please respond to the event.</td></tr><tr><td>Solid yellow</td><td>Your camera is unable to connect to Wi-Fi.</td><td>&#8226; Configure your Wi-Fi credentials.
&#8226; Ensure the Wi-Fi network has internet access.
&#8226; Ensure the Wi-Fi signal is sufficient where the device is placed.
<br>If the problem persists, get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td></tr><tr><td>Pulsing yellow</td><td>Your camera is not configured.</td><td>Get in touch with us by booking a callback from the __Support__ section of the SmartHome+ app.</td></tr></table>

How to install your TELUS Doorbell Camera / LED reference guide

How to install your TELUS Doorbell Camera

The time it takes to install the doorbell camera varies depending on where you install it. Standard installations typically take about 30 to 60 minutes to complete.

[notification text="__Note__: Do not attempt to insert an SD card into a HomeView camera. If you've already installed a micro SD card in your camera, unplug the camera and remove the card. If you need further assistance, you can schedule a call with a TELUS representative from the SmartHome+ app."]

How to install your TELUS Doorbell Camera  / SEO

This step-by-step installation guide will walk you through how to set up your doorbell camera.

How to install your TELUS Doorbell Camera  | TELUS Support

Video camera installation guides / Installing your TELUS HomeView Doorbell Camera / Interstitial Card

Front view of TELUS HomeView Doorbell Camera

TELUS HomeView Doorbell Camera

Watch this video on how to set up your Outdoor Camera:

[youtube:id:v36ETGMIbAE]


Installing your Outdoor Camera (V723 model) / Video on how to install your Outdoor Camera

[__Print the Outdoor Camera installation guide (PDF)__](//assets.ctfassets.net/9mt4r6ro1ay9/112ncqRkDjJdOh9gUh7S9F/587dea663e418bd891c3099b14ecc1a2/TELUS_Outdoor-Camera_Customer_Print_English_V1_12-08-2020__1_.pdf)

Installing your Outdoor Camera (V723 model) / Printable installation guide (PDF)

__What’s in the box?__
- Outdoor Camera
- ADC-V723
- Mounting plate power supply
- Wall anchors 
- Wall screws

![Outdoor camera box contents](//images.ctfassets.net/9mt4r6ro1ay9/5OHz2haZ8u05AiVhh8B0Yy/43ff29ab6aa6d7821a533e901c7ccf2c/Outdoor_camera_box_contents.png)

__You’ll need__:

- Smartphone or Tablet
- Screwdriver 
- Pencil 
- 2.5 Mbps upload Wi-Fi

__Optional__:
- Drill
- Ladder
- Caulk 
- Masonry drill bit
- 13mm (1/2 inch) drill bit
- Micro SD memory card for 24/7 continuous recording

![Outdoor camera tools required](//images.ctfassets.net/9mt4r6ro1ay9/2lMQ7CckC0baSLQjG15rn2/97ed146e3a29acef7c349fd22c0f7e84/Outdoor_camera_tools_required.png)

Installing your Outdoor Camera (V723 model) / Before you start

In the comfort of your home, plug in the camera to begin setup before taking it outside.

__Optional__: Install the micro SD card (not included) for [24/7 continuous recording](https://www.telus.com/en/support/article/onboard-recording).

1. Connect the power cable to the camera.
2. Plug the power supply into the power outlet and wait about 6 seconds for the LED to start flashing white.

![turn on outdoor camera](//images.ctfassets.net/9mt4r6ro1ay9/3N5v7cXmcyPcc8n3aVWGRI/1565075490b3193f81007ae79b84f03b/turn_on_outdoor_camera.png)

![Outdoor camera LED not flashing](//images.ctfassets.net/9mt4r6ro1ay9/7A76dyAGoxgZeVbTZqjRF5/111ed79aba79583509818db34f0c7c47/Outdoor_camera_LED_not_flashing.png)

__LED not flashing white?__
Press and hold the button on the bottom of the camera until the light starts flashing white.

Installing your Outdoor Camera (V723 model) / Step 1: Turn on the Camera indoors

Download the TELUS SmartHome app. Then log in with your My TELUS credentials.

<table type="white"><tbody><tr><td style="text-align: center;"><a href="https://play.google.com/store/apps/details?id=com.alarm.alarmmobile.android.telus&hl=en_CA" target="_blank"><img style="margin-left: auto; margin-right: auto;" src="//images.ctfassets.net/9mt4r6ro1ay9/3O8kA6PhsKMF5lO7nwTByu/35c42e14b2aabf53ccfab13d8fb68719/GooglePlay_English_2x.jpg"></a></td><td style="text-align: center;"><a href="https://apps.apple.com/ca/app/smarthome/id1200050042" target="_blank"><img style="margin-left: auto; margin-right: auto;" src="//images.ctfassets.net/9mt4r6ro1ay9/5CTYyLtbuNQVpmfBr7RXPl/68563126a74d75a534ff4d8d59279e35/AppStore_English_2x.jpg"></a></td></tr></tbody></table>

![SHS app login](//images.ctfassets.net/9mt4r6ro1ay9/6RhLtOTkkHbJY7gE0cW3GM/40d577c6b27298ea89621d9f4358535f/SHS_app_login.png)

Installing your Outdoor Camera (V723 model) / Step 2: Get the TELUS SmartHome App

1. Select __More__ at the bottom right-hand corner.
2. Select __+ Add Device__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/5Z5GaEufC1BNTcUYKhQNTp/01494d33d499aee08899e66712538adf/Install_Outdoor_Camera_V723_-_Step_3-2_-_EN.png" alt=”Screens of the TELUS SmartHome app and hand icons pointing at "Video Camera" and the "ADC-V723" camera model. ” max-width="500"]
3. Select __Video Camera__.
4. Select Outdoor Camera __ADC-V723__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/7H59PsSydc3GlmoPCKLpZD/989f94c7b4b7d4156debe3a3e2450cad/Install_Outdoor_Camera_V723_-_Step_3-1_-_EN.png" alt=”Screens of the TELUS SmartHome app and hand icons pointing at "More" and "Add Device".” max-width="500"]
5. Type in a name for your camera and select __Next__.


Installing your Outdoor Camera (V723 model) / Step 3: Add the camera to your account

Let’s connect your smartphone to the camera’s temporary Wi-Fi network. This will allow you to add the camera to your home Wi-Fi network.

1. On your smartphone, exit the TELUS SmartHome app and go to the __Settings__ app
2. Connect your smartphone to the camera’s temporary Wi-Fi network: __ADC-V723 (XX:XX:XX)__
![Connect your video device](//images.ctfassets.net/9mt4r6ro1ay9/3tb1Iu0arJCqpt8glGkT0t/0b0fbdba36402607cd2fa7881ca37a18/Connect_your_video_device.png)
![Connect to tempory Wi-Fi](//images.ctfassets.net/9mt4r6ro1ay9/riUpS26HNiw2mzMp6gR2V/dd69889fb43d402bd76a6a9d951b1fe1/Connect_to_tempory_Wi-Fi.png)

3. After you are connected to the __ADC-V723 (XX:XX:XX)__ Wi-Fi network, return to the TELUS SmartHome app and select __Next__
4. Select __Scan for Networks__
![Scan for Network](//images.ctfassets.net/9mt4r6ro1ay9/7cIeoXyphtNWHUWGKzxPjh/431c6de7b97cb0c1f49f7b94e51a8697/Scan_for_Network.png)

5. Select your home Wi-Fi network name from the list
6. Type in your Wi-Fi network password and select __Next__
7. Continue following the steps in the app until the installation is complete. This may take a few minutes
![connect to network](//images.ctfassets.net/9mt4r6ro1ay9/7yRPjNjeHp3aSpSuDbpjvx/38a3462c6b83e28de87ee7b063aef16f/connect_to_network.png)


Installing your Outdoor Camera (V723 model) / Step 4: Connect to temporary Wi-Fi network and follow the steps in the app

The Outdoor Camera requires a minimum of 2.5 Mbps upload speed to operate. In a browser on your smartphone, visit [__telus.com/SpeedTest__](https://www.telus.com/en/support/article/speed-test) to determine the Internet speed at your chosen location.

![select outdoor location](//images.ctfassets.net/9mt4r6ro1ay9/peZfxkWAZ1RoX3ZP4H7YL/d5aa7f137b4fd8f0765612360a875c53/select_outdoor_location.png)

__No Wi-Fi?__
If you are unable to find a location with adequate Wi-Fi coverage, please contact us at 1-855-255-8828 for assistance.

![check wi-fi speed](//images.ctfassets.net/9mt4r6ro1ay9/ZBAk4i0dMRuehlhKXlP8o/3fe61fa584d01914952709a9fbfcfb11/check_wi-fi_speed.png)

Installing your Outdoor Camera (V723 model) / Step 5: Select a location outside and check your Wi-Fi speed

1. Find an indoor or outdoor power outlet near the chosen camera location
<br></br>__Important__: If using an outdoor outlet, you must have a weatherproof enclosure. Additionally, do not use an outdoor outlet that is timer or switch controlled.
![Find outlet](//images.ctfassets.net/9mt4r6ro1ay9/6OZ0koXQpU8a3kohWwcjQ9/2aa5da92ee9320cf11681ea253eb811f/Find_outlet.png)

2. Connect the power cable to the camera, and then plug the power supply into the power outlet
![plug in camera](//images.ctfassets.net/9mt4r6ro1ay9/5WgjYvlfNpV15QvuvSXa2j/408fb51047719564cf7ec5f392d3752d/plug_in_camera.png)


Installing your Outdoor Camera (V723 model) / Step 6: Find an outlet near chosen location and plug in camera

Here are options to run your cable:
- Through the corner opening of a door, garage or window to an indoor power outlet
- Along siding to an outdoor power outlet with a weatherproof enclosure
- Through a drilled hole in the wall (use a 13mm (1/2 inch) drill bit)

__Tip__: Use caulk to seal around the drilled hole.

![plan cable route for outdoor camera](//images.ctfassets.net/9mt4r6ro1ay9/2p2o6IslaYthvp6Rj1LGun/6253aa24868792f823b189e589eb9551/plan_cable_route_for_outdoor_camera.png)

__Cable not long enough?__ Consider purchasing a DC Extension Cable.

![DC extension cable Outdoor Camera](//images.ctfassets.net/9mt4r6ro1ay9/Z0jWURIVYwhdjOZFiIyUq/1162e1e8e95761dd61dfcb489caf9942/DC_extension_cable_Outdoor_Camera.png)

Installing your Outdoor Camera (V723 model) / Step 7: Plan a cable route to outlet

1. Place the camera 2.5 to 4.5 metres (8 to 15 feet) above the ground
![determine camera angle](//images.ctfassets.net/9mt4r6ro1ay9/2NFNtSksgGa8kPoFWZCRHS/c7fcf081be8a9d43ac4c8651cb2c67a1/determine_camera_angle.png)
<br></br>__Tip__: Return to the TELUS SmartHome app and view the live feed to help adjust the camera to the desired position.
![Place camera](//images.ctfassets.net/9mt4r6ro1ay9/7f1dMBi4Chw538b1fgYJaA/969d690e3c7d59edffa593c42bdf7291/Place_camera.png)

2. Tilt the camera downward 30 to 60 degrees, enough to see people’s faces 
3. Make sure the camera has a clear view and the horizon is level
   __No clear view?__
   If you are unable to achieve a clear view at your chosen location, consider finding a different location to mount your camera. 
![camera angle](//images.ctfassets.net/9mt4r6ro1ay9/1TujVFdlhJ2jmy1cnDZAhX/c1c060f08cee9f05b90e6edef0f645ef/camera_angle.png)


Installing your Outdoor Camera (V723 model) / Step 8: Determine camera position and angle

1. Place the mounting bracket at the desired location, ensuring it is level
2. Using a pencil, mark location of the screw holes 

![mark screw holes](//images.ctfassets.net/9mt4r6ro1ay9/6wXkTqpEhyWgYQNNSdcWpK/8e1bea8ab9b5fc3c77a1b72f3c84e14a/mark_screw_holes.png)


Installing your Outdoor Camera (V723 model) / Step 9: Mark screw holes

- If you have wood, vinyl or aluminum siding go to __Step 12__
- If you have stucco, brick or stone go to __Step 11__

![determine your siding](//images.ctfassets.net/9mt4r6ro1ay9/7wzcwrZbeIwZFQIIEspkCQ/40b90dc45c6340ccab498161bcb1e072/determine_your_siding.png)

Installing your Outdoor Camera (V723 model) / Step 10: Determine your siding

1. Using a 6mm (¼ inch) masonry drill bit, drill pilot holes for the wall anchors
2. Push or hammer the wall anchors into the pilot holes

![Masonry install](//images.ctfassets.net/9mt4r6ro1ay9/5lVo78I6aZKQyafiZikat9/c18841bb584049c4e17a114569092f24/Masonry_install.png)

Installing your Outdoor Camera (V723 model) / Step 11: Masonry install

1. Place the mounting bracket over the marked location for the screws.
2. Screw the mounting bracket into the siding or wall.

[img src="//images.ctfassets.net/9mt4r6ro1ay9/13YEH2mqMtQIasdk82kZ3x/7fe63fcd4848807fb3e79eaca748cc10/Tools_to_attach_mounting_bracket.png" alt=”A diagram of tools needed to mount the outdoor camera, which include a screwdriver, mounting bracket and wall screws.” max-width="370"]

[img src="//images.ctfassets.net/9mt4r6ro1ay9/7qlrPCgDZ4eZIgf0ZobJJL/c65f5b6f7cf0a3b01ef19bee8a63ae93/Attach_mounting_bracket.png" alt=”An illustration showing a hand placing the mounting bracket over the marked location for the screws, and another illustration showing a screwdriver securing the screws into the mounting bracket.” max-width="370"]

Installing your Outdoor Camera (V723 model) / Step 12: Attach mounting bracket

1. Insert the camera into the mounting bracket, ensuring the power cable is placed in the groove
2. Secure the camera to the mounting bracket using the screw

![Attach outdoor camera](//images.ctfassets.net/9mt4r6ro1ay9/4rsWVNCV7wZwMsXkgxvXNS/c08800cff6fa2d9f3f7d9322c48f72b6/Attach_outdoor_camera.png)


Installing your Outdoor Camera (V723 model) / Step 13: Attach Outdoor Camera

Use staples, cable tracks or cable fasteners (not included) to secure the power cable.

![secure cable route](//images.ctfassets.net/9mt4r6ro1ay9/1jsV0jWh4Ta8O047rviUEh/9117d0fb4924ff812cd34d152b4eaa98/secure_cable_route.png)

Installing your Outdoor Camera (V723 model) / Step 14: Secure cable route

1. Select __Video__ at the bottom of the screen.
2. Select the gear icon at the top right-hand corner.
3. Select __Calibrate Cameras__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/5kGGWnwf9Z87ymDWbzZqk0/5ae041e52b39965e2a21d2201849bb67/Install_Outdoor_Camera_V723_-_Step_15.jpg" alt=”Screens of the TELUS SmartHome app and hand icons pointing at "More", "Manage Devices", "Video Camera" and the "ADC-V523" camera model.” max-width="430"]
4. Follow the on-screen steps to complete the calibration of your camera.

__Important__: If you do not calibrate your Outdoor Camera, it will not function properly.

[img src="//images.ctfassets.net/9mt4r6ro1ay9/1r82FIuvft0nhnfQdMbmpd/0ae265d6c9fcc971afcb07e924e7b1bb/caliberate_v723_2.png" alt=”An illustration showing a "Calibration complete" message in the TELUS SmartHome app.” max-width="370"]


Installing your Outdoor Camera (V723 model) / Step 15: Calibrate camera

To set up your Smart Video Alerts, watch this video.

[youtube:id:pr93O3EOxA0]

1. Log in to your TELUS SmartHome app.
2. Select __Video__ at the bottom of the screen.
3. Select the gear icon at the top right-hand corner.
4. Select __Recording Rules__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/9PhboZ3pQvvvK3KgARCsR/0bef437905e19a06752f95c472ec7507/Install_Outdoor_Camera_V723_-_Step_16.png" alt=”Screens of the TELUS SmartHome app and a hand icon pointing at the gear icon and "Recording Rules".” max-width="540"]
5. Select __Add New Rule__ at the top right-hand corner.
6. Select __Video Analytics__.
![Add recording rule in V723](//images.ctfassets.net/9mt4r6ro1ay9/2sQmGRGxrlHmChO5n1kMJQ/d9d56c8be2360ca454d3fb71135f8858/Add_recording_rule_in_V723.png)

7. Select __Camera__.
8. Select either __Ground Zone__ or __Tripwire__ and select __Next__.
![Ground zone or tripwire](//images.ctfassets.net/9mt4r6ro1ay9/3HHZaxWIIElmq2JSv6HHwp/941885b1a19ecbbcb0e7324d573de93c/Ground_zone_or_tripwire.png)

9. Follow the on-screen steps to complete the setup of your __Smart Video Alerts__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/7fK1cicLNWPx8BNDpwyCUK/a1d6312f77c15e83c095d696436e248e/Smartalert.png" alt=”An illustration of the lock screen on an iPhone and a SmartHome SmartAlert notification pop-up.” max-width="330"]

__Optional__: [Configure onboard recording schedule](https://www.telus.com/en/support/article/onboard-recording) if SD card has been inserted.

For more information, visit [__Setting up Smart Video Alerts__](https://www.telus.com/en/support/article/set-up-smart-video-alerts).


Installing your Outdoor Camera (V723 model) / Step 16: Customize Smart Video Alerts

__Nice work. You're all done.__

![V723 setup complete](//images.ctfassets.net/9mt4r6ro1ay9/GPwguyHBNGt2zUqwtfP88/a53020e99b017404b100a982611ded8a/V723_setup_complete.png)

Installing your Outdoor Camera (V723 model) / Your setup is complete

![LED reference guide V723](//images.ctfassets.net/9mt4r6ro1ay9/4KDRNHU4TMH29HAWskYc5W/a8c29c55595207a8b20a07bad62a2d8d/LED_reference_guide_V723.png)

Installing your Outdoor Camera (V723 model) / LED reference guide

__Power cycle__
If you have issues connecting the camera to a TELUS account, power cycle the camera (unplug the power cable from the camera and plug it back in to restore power). 

__Factory reset__
If issues persist, reset the camera to factory defaults. Press and hold the button on the bottom of the camera for 15 seconds until the light starts flashing red and green. 

__Note__: You will need to reinstall the camera after a factory reset.

![troubleshoot outdoor camera](//images.ctfassets.net/9mt4r6ro1ay9/2su1AF2fgIq8KJsfCOkEew/95fa72236ac99fffbc42861bd90e1343/troubleshoot_outdoor_camera.png)

__Important__: If the camera was previously installed to a TELUS account, it will need to be deleted before it can be installed again.

__Additional troubleshooting__

Need help with your Doorbell Camera? Visit [__telus.com/CameraSupport__](https://www.telus.com/camerasupport) for more step-by-step instructions to resolve your issue.


Installing your V723 Outdoor Camera / Troubleshooting 

Installing your Outdoor Camera (V723 model)

How to install your Outdoor Camera (V723 model)

Installing your Outdoor Camera (V723 model) Swiftype Title

Instructions to install outdoor camera (V723 model).

Installing your Outdoor Camera (V723 model) Swiftype Description

Installing your Outdoor Camera (V723 model) / SEO

Find step-by-step instructions to install your V723 Outdoor Camera. Learn how to connect, position and customize your camera for optimal performance.

How to install  Outdoor Camera (V723 model) | TELUS Support

Install your v723 Outdoor Camera using these instructions

Video camera installation guides / Installing your Outdoor Camera (V723 model) / Interstitial Card

Outdoor camera (V723 model)

Don’t have the app or having trouble logging in? [__Click here to learn more__](https://www.telus.com/en/support/article/log-in-telus-smarthome-security-account).

1. Log in to your TELUS SmartHome app on your mobile device.
2. Select __More__ at the bottom right-hand corner.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/3Mq4mHDj7z17U3l14kQ2xq/411ee1f1d9bded425b7a8e571426d407/Install_Outdoor_Camera__V722_model_-SHS_app-Step_2-EN.jpeg" alt="The TELUS SmartHome app and an arrow icon pointing at the More icon in the bottom-right corner of the screen." max-width="250"]
3. Select __+ Add device__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/3aPbLMiTKklEftu7SkqJGl/b5b84b75cd13187d3b2c33cfa8e9a3c2/Install_Outdoor_Camera__V722_model_-SHS_app-Step_3-EN.jpg" alt="The TELUS SmartHome app and an arrow icon pointing at the Add Device option under the Account menu." max-width="250"]
4. Select __Video camera__.
[img src="//images.ctfassets.net/9mt4r6ro1ay9/2KlEB5eRlZNQD1i40DtIpb/b3bcc8433f3401a2fd96d47c1dd49bbb/Install_Outdoor_Camera__V722_model_-SHS_app-Step_4-EN.jpeg" alt="The TELUS SmartHome app and an arrow icon pointing at the Video Camera option on the Add device screen." max-width="250"]
5. Select the correct camera type and proceed to the "Verify LED light" screen.
6. Make sure the camera is plugged in and the LED is flashing white. If the LED is not flashing white, press and hold the button on the back of the camera until the LED starts flashing white and then release. Select __Next__ on the top right of the screen to continue.
7. Please allow Alarm.com access to this device’s location. Select __Allow__.
8. Type in a name for your camera and select __Next__.
9. Once your device has been found, verify the last six digits of the MAC address (can be found on the back of the camera) and select the device you would like to install.
10. Exit the TELUS SmartHome app and proceed to your phone’s __Settings__ to connect to the __ALARM (XX:XX:XX)__ network. After you successfully connect to the ALARM network, return to the TELUS SmartHome app and select __Next__.
11. Scan for your Wi-Fi network from the list and enter the Wi-Fi password, then select __Next__.
12. After the installation process is completed, select __Next__.
13. Select __Done__ at the additional setup screen.
14. Your video feed should show up under __Video__ on your TELUS SmartHome app.
15. Follow the instructions below to mount your Outdoor Camera.

Installing your Outdoor Camera (V722 model) / Install the camera on your SmartHome App

When selecting a location to mount your Outdoor Camera, there are 3 important considerations:

__Wi-Fi strength__. Your camera requires a minimum of 2.5 MegaBits per second upload speed, but a stronger signal will create a more reliable and higher quality video feed. To test your Wi-Fi speed at your chosen location, run a speed test on a phone or laptop at that location by visiting [__telus.com/speedtest__](https://www.telus.com/en/support/article/speed-test). If you are unable to find a location with adequate Wi-Fi coverage, consider purchasing a TELUS Boost Wi-Fi to extend the range of your home Wi-Fi network. Call TELUS support for more information.

__Cable length__. Before mounting, you’ll need to plot a route to run the cable to a power outlet. In some cases, you may want to drill through a wall or run the cable along the siding. For more length, a DC extension cable can be purchased to insert between the camera and outlet segments of cable. The cable could be secured to the wall with staples, a cable track or raceway or any number of cable fasteners available at your local hardware store. Be sure to allow enough slack to adjust the cable as needed.

__Camera angle__. You will want to aim the camera with a good view. You can view the live feed of a connected camera in your SmartHome app. For your video analytics to work best, the camera should be 8 to 15 feet above the ground.

To mount the outdoor camera, you’ll need to drill holes into the wall. Use the longer screws that were included with the camera if you’re drilling into wood, and we recommend using the anchors for stucco or brick walls. You can then mount the camera body into the wall using the included screws.

Installing your Outdoor Camera (V722 model) / Mount your Outdoor Camera

To take full advantage of your camera(s), make sure to customize your [__Smart Video Alerts__](https://www.telus.com/en/support/article/using-your-video-services). To set up your Smart Video Alerts, follow these steps or watch this video.

[youtube:id:pr93O3EOxA0]

1. Log in to your TELUS SmartHome app.
2. Select __Video__.
3. Select the gear icon at the top right-hand corner.
4. Select __Recording rules__.
5. Select __Add rule__ at the top right-hand corner.
6. Select __Video Analytics__ and follow the on-screen steps to complete the setup of your Smart Video Alerts (to learn more on how to set up Smart Video Alerts, please read the [__Setting up Smart Video Alerts__](https://www.telus.com/en/support/article/set-up-smart-video-alerts) page).

Installing your Outdoor Camera (V722 model) / Customize your Smart Video Alerts

Need help with your video camera? Visit [__telus.com/CameraSupport__](https://www.telus.com/camerasupport) for more step-by-step instructions to resolve your issue.

Installing your Outdoor Camera (V722 model) / Troubleshoot your video camera

Installing your Outdoor Camera (V722 model)

How to install your Outdoor Camera (V722 model)

Installing your Outdoor Camera (V722 model) Swiftype Title

Installing your Outdoor Camera (V722 model) Swiftype Description

Installing your Outdoor Camera (V722 model) / SEO

Instructions to install outdoor camera (V722 model).